Sharp PN-V551 Скачать руководство пользователя страница 19

Страница: 19 / 66

Caution

• Turn on the monitor first before turning on the PC or

playback device.

Turning on the main power

Main power switch

Caution

• The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

• For a complete electrical disconnection, pull out the main

plug.

Turning Power On/Off

Turning power on/off

Press the POWER button or POWER switch to turn the power

ON/OFF.

Power LED

Status

Status of the monitor

Green lit

Power on

Orange lit

Power off (Standby mode)

Green flashing

Input signal waiting mode

Caution

• When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

TIPS

• When the main power switch is off, the monitor cannot be

turned on.

• If the monitor is in the input signal waiting mode and you

press the POWER button on the remote control unit, the

monitor enters standby mode.

• Setting the SCHEDULE flashes the power LED alternately

in red and orange in standby mode.

• When the POWER ON DELAY function is in use, the power

LED flashes in orange.

• To disable the logo screen from displaying when turning the

power ON, set LOGO SCREEN to OFF on the OTHERS

menu. (See page 33.)

• If you change the remote control mode to ALL MONITORS,

power can be turned ON/OFF for all secondary monitors

connected with RS-232 cable. (For operation with the

monitor buttons, use the buttons on the primary monitor.)

Содержание PN-V551



































































Результаты поиска

Содержание PN-V551

Отзывы:

Бренды по названию

Популярные бренды

Sharp PN-V551, Руководство по эксплуатации

Результаты поиска

Содержание PN-V551

Отзывы:

Бренды по названию

Популярные бренды