Sharp PN-K321 Скачать руководство пользователя страница 23

Страница: 23 / 37

You can return the settings to their factory-preset values and

restrict operations.

1. Hold down the [MENU/ENTER] button and [INPUT/

RETURN] button at the same time until “F” appears in

the screen, and then press the [MENU/ENTER] button

and [VOL-/ ] button at the same time while “F”

appears.

▲

▲
▲

▲

OFF

UNLOCKED

ON 1

OFF

FUNCTION

ALL RESET

ADJUSTMENT LOCK

RS-232C

OSD DISPLAY

LED

TEMPERATURE ALERT

STATUS ALERT

END…[RETURN]

OK…[ENTER]

2. Select and set the items.

ALL RESET

Resets the settings to the factory default settings.

Select ALL RESET, and then press [MENU/ENTER]

button.

After initialization, turn the main power switch off and

then back on.
ALL RESET ......Resets all the settings to the factory

default settings.

CANCEL ...........Go back without resetting.

ADJUSTMENT LOCK

You can disable operations on the monitor buttons.

OFF ...Enables operation.

ON 1 ..Disables all operations other than turning power

on/off and FUNCTION.

ON 2 ..Only the FUNCTION operation is enabled.

Disables all operations other than FUNCTION (not

even power on/off).

RS-232C

Specifies whether to allow control via RS-232C. (See

page 24.)

OSD DISPLAY

Shows/hides the menu, modes and messages.

The FUNCTION screen cannot be hidden.

ON 1 .............. Shows all menus, modes and messages.

ON 2 .............. Hides messages automatically displayed

by the display. Shows messages during

operation.

OFF ............... Hides all menus, modes and messages.

LED

Specifies whether to light the power LED.

Initialization (Reset)/Functional Restriction Setting (FUNCTION)

TEMPERATURE ALERT

Selects the notification method for an abnormal

temperature.

OFF .............. Do not notify about an abnormal

temperature.

OSD & LED .. When an abnormal temperature is

detected, the power LED flashes in red

and green alternately and the screen

displays a message: TEMPERATURE.

LED............... When an abnormal temperature is

detected, the power LED flashes in red

and green alternately.

STATUS ALERT

Selects the notification method for a hardware error.

OFF .............. Do not notify about the error.

OSD & LED .. When a hardware error is detected, the

power LED flashes in red and the screen

displays a message: STATUS [xxxx].

LED............... When a hardware error is detected, the

power LED flashes in red.

3. Press [INPUT/RETURN] button to return to the normal

screen.

TIPS

• When both abnormal temperature and hardware error are

detected, the hardware error notification overrides.

• If TEMPERATURE ALERT or STATUS ALERT is set to

OSD & LED, alert messages will appear even if the OSD

DISPLAY is set to ON 2 or OFF.

• If TEMPERATURE ALERT or STATUS ALERT is set to LED

or OSD & LED, the LED lights even if the LED function is

set to OFF.

Содержание PN-K321






































Результаты поиска

Содержание PN-K321

Отзывы:

Похожие инструкции для PN-K321

Бренды по названию

Популярные бренды

Sharp PN-K321, Руководство по эксплуатации

Результаты поиска

Содержание PN-K321

Отзывы:

Похожие инструкции для PN-K321

Бренды по названию

Популярные бренды