Sharp PN-80TC3A страница 19 Скачать руководство пользователя

Страница: 19 / 69

Touch Panel / Touch Pen Preparations

Connecting the touch pen adapter

To use the touch pen, insert the touch pen adapter into the

touch pen adapter port on the monitor.

Touch pen

adaptor

Touch pen

adapter screw

(antitheft)

Touch pen

adapter port

Touch Pen Preparations

Inserting the battery

2 touch pens are supplied. Insert the batteries in the touch

pens.

1. Remove the battery cap.

2. Open the cover and insert the supplied battery (LR-03

(“AAA” size) x 1) into the touch pen.

Check the plus (+) and minus (-) markings on the inside

of the touch pen and insert the battery in the correct

orientation.

Battery cap

3. Replace the cover and battery cap.

TIPS

• The supplied battery (LR-03 (“AAA” size)) may be

exhausted in a short time, depending on how it was stored.

• If the touch pen will not be used for an extended time,

remove the battery from the touch pen.

• For the battery, use an alkaline battery.

• You can affix the supplied ID labels to distinguish the touch

pens.

Computer preparations

To use the touch panel, the touch pen and the eraser, install

the software below.

• Touch pen Management Tool

• Pen Software

To install the software, see the manual for each.

Содержание PN-80TC3A






































































Результаты поиска

Содержание PN-80TC3A

Отзывы:

Похожие инструкции для PN-80TC3A

Бренды по названию

Популярные бренды

Sharp PN-80TC3A, Руководство по эксплуатации

Результаты поиска

Содержание PN-80TC3A

Отзывы:

Похожие инструкции для PN-80TC3A

Бренды по названию

Популярные бренды