Sharp PN-80TC3A страница 13 Скачать руководство пользователя

Страница: 13 / 69

Connecting Peripheral Equipment

7. Audio 1 input terminal

8. Audio 2 input terminal

• Use an audio cable without resistance.

• Set the audio input terminal to be used in each input

mode in AUDIO SELECT on the SETUP menu.

9. DisplayPort output terminal

• The screen displayed on the monitor and the audio output

from the monitor can be output to an external device.

• Use a commercially available DisplayPort cable

(conforming to the DisplayPort standard).

• Outputting HDCP-encrypted video requires an external

device which supports HDCP.

10. Audio output terminal

• The output sound varies depending on the input mode.

• The volume of the output sound can be fixed by setting

AUDIO OUTPUT of AUDIO OPTION on the SETUP

menu.

• It is not possible to control the sound output from the

audio output terminals with the AUDIO menu.

11. Touch pen adapter port

• Connect the touch pen adapter in order to use the touch

pen. (See page 19.)

12. USB 1 port (for touch panel)

• To use the touch panel with a computer connected to the

terminal below, connect the touch panel to the computer

with a USB cable.

(Factory setting. Can be changed in TOUCH INPUT

SELECT on the SETUP menu.)

- D-sub 1 input terminal

- DisplayPort input terminal

- HDMI 1 input terminal

13. USB 2 port (for touch panel)

• To use the touch panel with a computer connected to the

terminal below, connect the touch panel to the computer

with a USB cable.

(Factory setting. Can be changed in TOUCH INPUT

SELECT on the SETUP menu.)

- D-sub 2 input terminal

- HDMI 2 input terminal

- HDMI 3 input terminal

14. RS-232C input terminal

• The monitor can be connected to a computer using the

RS-232C conversion cable (supplied) and a commercially

available RS-232 straight cable to control the monitor

from the computer.

15. LAN terminal

• You can control the monitor from a computer on a network

by connecting a commercially available LAN cable

between this terminal and a network.

16. External speaker terminals

• To use external speakers, set SPEAKER SELECT to

EXTERNAL in AUDIO OPTION on the SETUP menu.

• Be sure to use external speakers with an impedance of 6 Ω

or greater and a rated input of at least 10 W.

1. While pushing the tab, insert the tip of the cable.

2. Release the tab.

TIPS

• Be sure to connect the + and - terminals and the left and

right speakers properly.

• Avoid short circuiting the + and - terminals.

• When SPEAKER SELECT is set to EXTERNAL, the

internal speakers are disabled.

17. USB cable

• To use the USB port on the front of the tray (for USB

device) (USB 2.0 compliant), connect the USB cable to

the USB port on the computer.

USB port (for USB device)

Computer

* The touch panel must be connected separately.

Содержание PN-80TC3A






































































Результаты поиска

Содержание PN-80TC3A

Отзывы:

Похожие инструкции для PN-80TC3A

Бренды по названию

Популярные бренды

Sharp PN-80TC3A, Руководство по эксплуатации

Результаты поиска

Содержание PN-80TC3A

Отзывы:

Похожие инструкции для PN-80TC3A

Бренды по названию

Популярные бренды