background image

4

IMPORTANT SAFETY INSTRUCTIONS

Always follow basic safety precautions 

when using electrical appliances, 

including the following:

WARNING 

– Always observe the 

following to reduce the risk of electrical 

shock, fire, or injury:

• 

Read all instructions before using the 

main unit.

• 

Use only a 220-240 volt outlet.

•  This appliance is not intended for use 

by persons (including children) with 

reduced physical, sensory or mental 

capabilities, or lack of experience 

and knowledge, unless they have 

been given supervision or instruction 

concerning use of the appliance by a 

person responsible for their safety. 

Children should be supervised to 

ensure they do not play with the 

appliance.

•  If the power cord is damaged, it must 

be replaced by the manufacturer, its 

service agent, a Sharp authorized 

Service Center or similarly qualified 

persons in order to avoid a hazard. 

Contact the nearest Service Center 

for any problems, adjustments, or 

repairs.

•  Be sure to remove the power plug, 

before performing maintenance, when 

removing and attaching and replacing 

the filter and when not using for a 

long time. Failure to do so can cause 

a short circuit resulting in electrical 

shock or fire.

•  Do not use the main unit if the power 

cord or plug is damaged or if the 

connection to the wall outlet is loose.

• 

Periodically remove dust from the plug.

• 

Do not insert fingers or foreign objects 

into the air intake or air outlet.

• 

When removing the power plug, always 

hold the plug and never pull on the cord. 

Failure to do so can cause a short circuit 

resulting in electrical shock or fire.

•  Be careful not to damage the power 

cord, it may cause electric shock, excess 

heat or fires.

• 

Do not remove the plug when your hands 

are wet.

•  Do not place the main unit near or on 

hot objects, such as stoves or heaters, 

or where it may come into contact with 

steam.

•  Do not operate the main unit in rooms 

where aerosol insecticides are present. 

Do not operate the main unit in rooms 

where there is oily residue, incense, 

sparks from lit cigarettes, or chemical 

fumes in the air. Do not operate the main 

unit in places where it may get wet, such 

as a bathroom.

•  Be cautious when cleaning the main unit. 

Strong corrosive cleansers can damage 

the exterior.

• 

Do not expose the main unit to water. 

Doing so can cause a short circuit or 

electrical shock. 

 

NOTE 

– What to do if the main unit 

interferes with radio or TV reception
If the air purifier interferes with radio or 

television reception, try one or more of the 

following measures:

•  Adjust or reposition the receiving 

antenna.

• 

Increase the distance between the main 

unit and the radio or TV.

•  Connect the equipment into an outlet on 

a circuit different from that of the radio or 

TV receiver.

• 

Consult the dealer or a qualified radio or 

TV technician.

 

 

 

 

 

 

 

 

 

 

 

 

FP-J80M_J60M.indd   4

2018/09/07   10:23:42

Содержание Plasmacluster FP-J60M

















Отзывы: