background image

9

PLASMACLUSTER ION 

SPOT MODE

START/STOP

AUTO MODE

HAZE MODE

SELECTING MODE

SLEEP : 

The main unit will operate quietly, and the fan 

speed is automatically switched depending on 

the amount of impurities in the air. 

The Front Display and Cleanliness Monitor go 

off automatically. 

POLLEN : 

The DUST SENSOR sensitivity is automatically 

increased and quickly detects impurities such 

as dust and pollen and clean the air powerfully.

START

STOP

OPERATION

The fan speed is automatically controlled  

depending on the 3 detection. (Dust(sensitive) / 

Odor / Light)

NOTE

• 

Front Display, Cleanliness Monitor automatically 

switch ON and OFF based on room brightness.   

(When light control is set to "Auto".  (page 11))

Use this mode when you want to remove adhering 

odor, germs, and other substances from cloths, 

sofas and curtains.

Adjust Front Louver manually.

NOTE

• 

Emits highdensity Plasmacluster Ions only in the 

forward direction.

• Discharges stronger air for 8 hours. When the 

operation finishes, the main unit will return to its 

prior operation mode.

• 

The Plasmacluster Ion can not be turned “OFF”.

Operates at HIGH fan speed for 60 minutes and 

then alternates between Low and High level for 20 

minutes each.

NOTE

• 

The Plasmacluster Ion can not be turned “OFF”.

10 minutes: Max High fan level 
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level

♪♪

POLLEN

SLEEP

LOW

MED

MAX

♪♪♪

♪♪♪♪♪

FP-J80M_J60M.indd   9

2018/09/07   10:23:51

Содержание Plasmacluster FP-J60M

















Отзывы: