Sharp NAR0051 Скачать руководство пользователя | Manualshive

Страница: 103 / 124

background image

Appendixes

A-11

Re-installation Instructions

To recover your hard disk, you will use PowerQuest®EasyRestore™. Before starting re-
installation, read the following End User License Agreement first.

PowerQuest(R) EasyRestore (TM) End User License Agreement

IMPORTANT: Read this before using your copy of PowerQuest software.

This document is a legal agreement between you, the "end user," and PowerQuest Corporation. Use of the
software indicates your acceptance of these terms. As used in this License Agreement, the term "Software"
means the EasyRestore software included on the CD provided with this License Agreement.

1. PROPRIETARY RIGHTS. The Software is a proprietary product of PowerQuest Corporation
("PowerQuest") or its licensors and is protected under U.S. copyright laws and international treaty
provisions. Ownership of the Software and all copies, modifications, and merged portions thereof shall at
all times remain with PowerQuest or its licensors.

2. GRANT OF LICENSE. The Software is being licensed to you, which means you have the right to use the
Software only in accordance with this License Agreement. The Software contains pre-installed software for
disaster recovery purposes. The Software is only authorized for distribution together with a specific
computer. This License authorizes you to use the Software for disaster recovery purposes only, to restore
the hard disk image contained on the CD to the computer with which the CD and Software were originally
shipped.

3. NONPERMITTED USES. Without the express permission of PowerQuest, you may not (a) use, copy,
modify, alter, or transfer, electronically or otherwise, the Software or documentation except as expressly
permitted in this License Agreement, or (b) translate, reverse program, disassemble, decompile, or
otherwise reverse engineer the Software.

4. TECHNICAL SUPPORT. PowerQuest is NOT responsible to provide technical support. Any and all
technical support questions, regarding the Software, should be referred to the place of purchase.

5. U.S. GOVERNMENT RESTRICTED RIGHTS. If you are acquiring the Software on behalf of any unit
or agency of the United States Government, the following provision applies: It is acknowledged that the
Software and the documentation were developed at private expense and that no part is in the public domain
and that the Software and documentation are provided with RESTRICTED RIGHTS. Use, duplication, or
disclosure by the Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in

«
...
101
102
103
104
105
...
»

Содержание NAR0051





























































































































Отзывы:

Нет отзывов

Похожие инструкции для NAR0051

Бренд: Raon Страницы: 23

ThinkPad R50 Series

Бренд: IBM Страницы: 2

Toughbook CF-74JCL02AM

Бренд: Panasonic Страницы: 36

Бренд: FIC Страницы: 128

Toughbook CF-72TCJUZPM

Бренд: Panasonic Страницы: 36

Бренд: Intel Страницы: 29

Бренд: Asus Страницы: 102

Alienware m15 R4

Бренд: Dell Страницы: 21

Alienware m15 R7

Бренд: Dell Страницы: 24

Alienware m15 R6

Бренд: Dell Страницы: 24

C600 - Latitude Intel P-4 1.4GHz

Бренд: Dell Страницы: 62

Alienware m15 R3

Бренд: Dell Страницы: 20

Бренд: Dell Страницы: 9

Chromebook 3400

Бренд: Dell Страницы: 108

Бренд: Dell Страницы: 118

d400 - Latitude - Pentium M 1.3 GHz

Бренд: Dell Страницы: 78

blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Бренд: Dell Страницы: 248

Chromebook 5190

Бренд: Dell Страницы: 85

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды