MX-FX11 FAX SOFTWARE SWITCH 2 – 15
92
8
Function
Job log memory at
times of successive
communication
Setting to determine whether successive communications in the job log are
treated as 1 communication at a time or as 1 successive communication.
"0": Treat each communication as 1
"1": Treat as 1 successive communication
*3
SW
No.
Bit
No.
Item
SW selection and function
System settings
•
Nighttime FAX mode:
•
Pseudo-nighttime mode:
<Power status>
Resident power ON
Sub power OFF
Main power OFF
<Power status>
Resident power ON
Sub power ON
Main power ON
<Power SW status>
Main power SW: ON
Panel power SW: OFF
<Power SW status>
Main power SW: ON
Panel power SW: OFF or ON
Or
Power save mode (the power save key is pressed or in the auto power shut off state)
(Either case will provide the conditions for the pseudo-nighttime mode.)
<Function>
When CI (calling) signal is detected from the FAX line,
power can be supplied to the machine and the FAX BOX.
<Function>
The power is supplied to the machine (including SCU/PCU) and the FAX BOX or the
HDD, and the panel light is turned OFF.
Under this condition, the following operations except for FAX scanning can be
performed:
•
FAX/NWS send, FAX receive/internet FAX receive, printer data receive, network
access, etc.
SW
No.
Bit
No.
Item
SW selection and function
System settings
93
1
Function
Background process
when specifying the
time
Setting to determine whether the secondary storage process in ScanToXXX
(except for ScanToUSB) by specifying the time is performed in the background
or in the foreground with "Processing" displayed on the operation panel.
When the soft SW62-2 "Secondary storage background process inhibit in
scanner send (other than USB)" is set to "1: Inhibit," the process is made in the
foreground regardless of this setting.
"0": Background process
"1": Foreground process
2
Function
Received data printing
hold screen display
setting
Setting to determine whether the print hold screen is displayed or not after
entering the product key of the document service kit.
This setting can be changed only in the simulation mode.
"0": Enable (Displayed)
"1": Disable (Not displayed)
3
Function
Decode error process
in printing the FAX/
Internet FAX reception
data
Setting of the process when a decode error occurs in printing the FAX/Internet
FAX reception data.
"0": Judged as E7-06 trouble.
When a decode error is detected, it is judged as E7-06 trouble and printing is
not completed. The image data of the decode error page are not deleted.
• When the power is turned OFF/ON, the received data can be printed again.
(In case of E7-06 error, however, manual transfer cannot be performed.)
"1": Not judged as E7-06 trouble.
The area after the line of decode error is printed as white data. It is not
processed as a trouble.
4
-
Nighttime mode level
setting when D-SMTP
is enable
Setting is made to select the power level in the nighttime mode. When 8W is
selected, D-SMTP reception is enable with the D-SMTP function enable. When
1W is selected, the nighttime power falls to the energy save mode and D-SMTP
reception is disable.
"0": 8W nighttime (D-SMTP Enable)
"1": 1W nighttime (D-SMTP Disable)
*3
5
-
FFL address book
renewal time stamp
check setting
Setting is made to select YES/NO of checking the synchronization of time
stamps between the address book renewal time in the printer driver and that in
the MFP in the function flow light (FFL) function.
"0": Check is made.
"1": Check is not made.
* Since synchronization of renewal time stamps of the address books is made
as a condition for the FFL function in order to prevent erroneous sending,
this setting must be carefully made especially when changing.
*2