manualshive.com logo in svg

Sharp MX-FNX9, Руководство по обслуживанию

Sharp MX-FNX9 - многофункциональное устройство для офиса, обеспечивающее высококачественную печать, сканирование и копирование. Для обслуживания и ремонта доступен сервисный мануал, который можно бесплатно скачать с manualshive.com. Устройство обеспечит эффективную работу вашего офиса.

Поделиться
Скачать
background image

MX-FNX9  ELECTRICAL SECTION  10 – 2

6)

Paper surface sensor 2 (FSLD2)
The paper surface sensor 2 (FSLD2) employs the photo inter-
rupter in which the light emitting diode and the photo transistor
are integrated.
The paper surface is detected by interruption of lights with the
lever-type actuator.
Signals are inputted to the CPU (IC10-89pin) through the noise
filter of R18 and C6.
The logic of the signal inputted to the CPU is H when light is
interrupted, and L when light is emitted to the sensor.
R10 is the current-limiting resistor of the light emitting diode.
R16 is the load resistor of the sensor.

7)

Stapler HP sensor (FSTHPD)
Stapler HP sensor (FSTHPD) employs the photo interrupter in
which the light emitting diode and the photo transistor are inte-
grated.
The home position is detected by interruption of lights with the
actuator of the light-shielding plate.
Signals are inputted to the CPU (IC10-18pin) through the noise
filter of R27 and C7.
The logic of the signal inputted to the CPU is H at the stapler
unit home position.
R19 is the current-limiting resistor of the light emitting diode.
R23 is the load resistor of the sensor.

8)

Empty sensor (FSTPD)
The empty sensor (FSTPD) employs the photo interrupter in
which the light emitting diode and the photo transistor are inte-
grated.
Paper empty is detected by interruption of lights with the lever-
type actuator.
By use of Q16, the logic of signal when the connector is dis-
connected is made the same as when light is emitted to the
sensor (paper empty).
Signals are inputted to the CPU (IC10-90pin) through the noise
filter of R28 and C8.
The logic of the signal inputted to the CPU is H when paper is
provided in the process tray, and L when paper is not provided.
R20 is the current-limiting resistor of the light emitting diode.
R24 is the load resistor of the sensor.

9)

Alignment plate HP sensor F (FFJHPD)
The alignment plate HP sensor F (FFJHPD) employs the photo
interrupter in which the light emitting diode and the photo tran-
sistor are integrated.
The home position is detected by interruption of lights with the
actuator of the light-shielding plate.
Signals are inputted to the CPU (IC10-57pin) through the noise
filter of R29 and C9.

The logic of the signal inputted to the CPU is L at the front side
alignment guide home position.
R21 is the current-limiting resistor of the light emitting diode.
R25 is the load resistor of the sensor.

10) Alignment plate HP sensor R (FRJHPD)

The alignment plate HP sensor R (FRJHPD) employs the
photo interrupter in which the light emitting diode and the
photo transistor are integrated.
The home position is detected by interruption of lights with the
actuator of the light-shielding plate.
Signals are inputted to the CPU (IC10-58pin) through the noise
filter of R30 and C10.
The logic of the signal inputted to the CPU is L at the rear side
alignment guide home position.
R22 is the current-limiting resistor of the light emitting diode.
R26 is the load resistor of the sensor.

11) Inlet port sensor (FED)

The inlet port sensor (FED) employs the photo interrupter in
which the light emitting diode and the photo transistor are inte-
grated.
The inlet port is detected by interruption of lights with the lever-
type actuator.
Signals are inputted to the CPU (IC10-71pin) through the noise
filter of R37 and C11.
The logic of the signal inputted to the CPU is H when paper is
provided, and L when paper is not provided.
R31 is the current-limiting resistor of the light emitting diode.
R34 is the load resistor of the sensor.

12) Roller up/down sensor (FRLD)

The roller up/down sensor (FRLD) employs the photo inter-
rupter in which the light emitting diode and the photo transistor
are integrated.
The roller up/down is detected by interruption of lights with the
lever-type actuator.
Signals are inputted to the CPU (IC10-59pin) through the noise
filter of R38 and C12.
The logic of the signal inputted to the CPU is L when the roller
is at the upper standby position.
R32 is the current-limiting resistor of the light emitting diode.
R35 is the load resistor of the sensor.

13) Take-up belt sensor (FBRD)

The take-up belt sensor (FBRD) employs the photo interrupter
in which the light emitting diode and the photo transistor are
integrated.
The take-up belt is detected by interruption of lights with the
lever-type actuator.
Signals are inputted to the CPU (IC10-61pin) through the noise
filter of R39 and C50.
The logic of the signal inputted to the CPU is L when the take-
up belt is on the upper side.
R33 is the current-limiting resistor of the light emitting diode.
R36 is the load resistor of the sensor.

Stapler HP sensor (FSTHPD)

Empty sensor (FSTPD)

Alignment plate HP sensor F
(FFJHPD)

Alignment plate HP sensor R
(FRJHPD)

Inlet port sensor (FED)

Roller up/down sensor (FRLD)

Take-up belt sensor (FBRD)

Содержание MX-FNX9



























































Отзывы:

Нет отзывов

Похожие инструкции для MX-FNX9

Xyron FPO User Manual preview
FPO
Бренд: Xyron Страницы: 6
Xerox 7700 Setup Manual preview
7700
Бренд: Xerox Страницы: 2
Xerox 7700 Setup And Quick Reference Manual preview
7700
Бренд: Xerox Страницы: 40
Xerox 7700 Advanced Features And Troubleshooting Manual preview
7700
Бренд: Xerox Страницы: 69
Xerox 7700 Install Manual preview
7700
Бренд: Xerox Страницы: 42
ABB CS500 Mounting Instructions preview
CS500
Бренд: ABB Страницы: 27
Canon Paper Deck-V1 General Timing Chart/General Circuit Diagram preview
Paper Deck-V1
Бренд: Canon Страницы: 12
Canon imagePROGRAF iPF8300S Basic Manual preview
imagePROGRAF iPF8300S
Бренд: Canon Страницы: 52
Canon i250 Series Specification preview
i250 Series
Бренд: Canon Страницы: 2
StoneAge AUTOSTROKE AST-200-V2 User Manual preview
AUTOSTROKE AST-200-V2
Бренд: StoneAge Страницы: 28
Panasonic Toughbook CF-F8EWDZZAM Supplementary Manual preview
Toughbook CF-F8EWDZZAM
Бренд: Panasonic Страницы: 20
Panasonic DP-CL21 Series Operating Instructions Manual preview
DP-CL21 Series
Бренд: Panasonic Страницы: 9
Panasonic DP-CL21 Series Specifications preview
DP-CL21 Series
Бренд: Panasonic Страницы: 2
Bartington Mag648 Operation Manual preview
Mag648
Бренд: Bartington Страницы: 11
Nacon RC-300 Installation Manual preview
RC-300
Бренд: Nacon Страницы: 12
Dakota Digital VHX-37F Installation preview
VHX-37F
Бренд: Dakota Digital Страницы: 2
Dakota Digital VHX systems Operating Manual preview
VHX systems
Бренд: Dakota Digital Страницы: 6
Dakota Digital BIM-01-2 Manual preview
BIM-01-2
Бренд: Dakota Digital Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды