MX-FNX9 DISASSEMBLY AND ASSEMBLY 6 – 3
(4) Roller up/down sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the bracket, and remove the roller up/down sensor.
(5) Take-up belt sensor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Slide the harness guide, remove the bracket, and remove the
take-up belt sensor.
(6) Roller up/down motor
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the rear cover. Refer to A-(3).
4)
Remove the reverse guide unit.
5)
Slide the stapler drive unit. Disconnect the connector from the
PWB. Remove the roller up/down motor unit. Remove the
roller up/down motor.
(7) Belt separation solenoid
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit. Refer to A-(5).
4)
Remove the parts, and remove the belt separation solenoid.
(8) Bundle exit paper transport roller
1)
Remove the inner finisher from the main unit. Refer to A-(1).
2)
Remove the inner cover. Refer to A-(2).
3)
Remove the reverse guide unit. Refer to A-(5).
4)
Remove the parts, and remove the bundle exit paper transport
roller unit.
5)
Remove the parts, and remove the bundle exit paper transport
roller.
1
2
1
2
3
2
1
3
1
1
2
2
3
1
2
3
