Sharp MX-FN10, Руководство по обслуживанию

Страница: 28 / 56

MX-FN10 DISASSEMBLY AND ASSEMBLY 6 – 9
(7) Entry Roller
1) Remove the paper pass unit.
2) Remove the bottom cover. (See (4).)
3) Remove the interface transport motor. (See (5).)
4) Remove the front cover. (See (6).)
5) Remove the stopper band, and the bracket, then remove the
upper guide unit.
* When installing, adjust so that the solenoid is fit with the
bracket

adjustment reference. If the upper guide unit mag-
net lifts up, adjust the bracket for the magnet not to lift up.
6) Remove each parts, then remove the entry roller.
(8) Post Entry Roller
1) Remove the paper pass unit.
2) Remove the bottom cover. (See (4).)
3) Remove the front cover. (See (6).)
4) Remove the upper guide unit. (See (7).)
5) Remove the bracket, and remove the post entry roller unit.
6) Remove each parts, and remove the post entry roller.
(9) Pre Entry Roller
1) Remove the paper pass unit.
2) Remove the bottom cover. (See (4).)
3) Remove the front cover. (See (6).)
4) Remove the upper guide unit. (See (7).)
5) Remove each parts, and remove the pre entry roller.
2
2
3
1
Adjustment
reference
±
0. 5