Sharp MX-C250F, Техническое справочное руководство

Страница: 52 / 65

TEST SIMULATION
SHARP
52
65
LCD Operation & Adjust
1 LCD touch panel adjustment
[MX-C301W]
2 LCD touch panel adjustment result display
[MX-C301W]
5 Operation panel key input test
[MX-C301W]
10 Displays key standby time
[MX-C250/300]
66
Fax Control Settings & Adjustments
1 Fax Soft SW setting
SW24 Communication Signal sending
level (bits 1-8)
[MX-C301W]
:-
Default Value (Australia/NZ)
00001011
SW25,
1 to 5 Signal Sending Out Level
[MX-C250F/300W]:-
0(0dBm) - 26(-26dBm).
SW27-4,5 V.34 mode function
[MX-C250F/300W]:-
0 = OFF
1 = ON.
SW27-4 V.34 mode function (call
arrival)
[MX-C301W]
:-:-
0 = V.34 valid.
1 = V.34 invalid.
SW27-5 V.34 mode function (polling
when calling)
[MX-C301W]
:-:-
0 = V.34 valid.
1 = V.34 invalid.
SW27-6 V.34 mode function (manual
communication)
[MX-C301W]
:-
0 = V.34 valid.
1 = V.34 invalid.
SW33-6,7 Transmission cable amplitude
equaliser
[MX-C301W]
:-
00 = 0dB
01 = 4dB
10 = 8dB
11 = 12dB
2 Country code default set (Fax)
3 Fax PWB controller memory check
[MX-C301W]
4 Fax signal line check (Max level)
5 Fax signal line check (Soft SW setting level)
[MX-C301W]
6 Fax list print (confidential registration)
[MX-C301W]
7 Fax memory printout (all data)
8 Fax sound message setup
66
Fax Control Settings & Adjustments
9 Fax signal line check (Soft SW setting)
[MX-C301W]
10 Fax all memory clear
11 Voice signal check (line/speaker 300bps)
12 Voice signal check (line/speaker 300bps)
13 Register dial number for Sim 66-14/15/16
14 Adjust/check the time dial pulse (10bps)
[MX-C301W]
15 Adjust/check the time dial pulse (20bps)
[MX-C301W]
16 Adjust/check the send level DTFM signal
[MX-C301W]
17 DTFM signal to send to line (Max level)
18 DTFM signal to send to line (Soft Sw level)
[MX-C301W]
21 Print various registration information
22 Set the sound volume of the handset
[MX-C301W]
24 Fast memory data clear
[MX-C301W]
29 Fax address book clear
[MX-C301W]
30 Tel/LIU sensor status check
31 ON/OFF setting of output port (Tel/LIU)
32 Received data check (comparison)
33 Busy Tone/CNG/CED/FNET detect check
34 Display time required for sending test data
36 Check Send/Receive from modem.
[MX-C301W]
39 Check Destination saved in Fax EEPROM
[MX-C301W]
42 Rewrite PIC program installed on Fax box
[MX-C301W]
43 Write program & adjustment values to PIC
installed on Fax
[MX-C301W]
61 Display FAX related soft switch (151-250)
[MX-C301W]
62 FAX receive data export in PDF format.
[MX-C301W]
67 Printer Settings & Adjustments
17 Printer NVRAM clear
[MX-C301W]
24 Printer half tone auto adjustment
[MX-C301W]
25 Printer half tone colour adjustment
26 Standard target select of printer half tone
auto adjustment
[MX-C301W]
27 Scanner target of printer calibration setup
(Service)
[MX-C301W]
28 Standard target of printer colour
calibration (Service)
[MX-C301W]