Sharp MD-MT80W(S), Руководство по обслуживанию

Страница: 22 / 56

MD-MT80W/90W/90/90C
– 22 –
: ATT Autoadjustment menu : ATT adjustment error (adjustment value output) : During ATT autoadjustment
Adjustment error
Normal end
: ATT adjustment normal end (adjustment value output)
: Continuous playback (high reflection) : Continuous playback (low reflection)
PLAY
MODE
A U T O 2
ATT Auto Adjustment
A D J . O K
A D J . N G
S Q # # # # A P # # # # A T 2
* When the [STOP ] button is pressed in specific menu, the "TEST MODE STOP" state is set. * " " represent the adjustment number as follows.
0 0 : Innermost periphery move 0 3 : Pit section tracking ATT setting 0 4 : Pit section focus ATT setting 0 6 : External periphery move
(low reflection only)
0 7 : TCRS ATT setting
(low reflection only)
0 8 : Groove section tracking ATT setting
(low reflection only)
0 9 : Groove section focus ATT setting
(low reflection only)
: Focus balance Adjustment mode
: Focus balance
# # # : Jitter error
PLAY
b # # #
: Preautomatic Adjustment menu : Preadjustment error (adjustment value output) : During preadjustment adjustment
Adjustment error
Normal end
: Preadjustment normal end (adjustment value output) : During ATT automatic adjustment
PLAY
PLAY
A U T O 1
Preautomatic Adjustment
A D J . O K
A D J . N G
A T 2 A T 1
* When the [STOP ] button is pressed in specific menu, the "TEST MODE STOP" state is set. * " " represent the adjustment number as follows.
0 0 : Innermost periphery move 0 2 : ABEF offset tentative measurement 0 4 : RF side focus gain coarse adjustment 0 5 : Focus ATT tentative setting 0 6 : RF side bit section tracking gain adjustment 0 7 : COUT level setting for pit section adjustment 0 8 : External periphery move 0 9 : RF side groove section tracking gain adjustment 1 0 : COUT level setting for groove section adjustment 1 1 : RF side TCRS gain adjustment 1 2 : Tracking ATT initial setting 1 3 : RF side focus gain minor adjustment 1 4 : Focus ATT initial setting 1 5 : S gain "High" ABEF offset measurement 1 6 : TCRS offset measurement 1 7 : S gain "Low" ABEF offset measurement