Sharp LL-T2020, Руководство по эксплуатации

Страница: 28 / 148

28
Specifications
The DVI-I input connector pin
(DVI-I connector with 29 pins)
1 7 6 5 4 3 2 8
9 15 14 13 12 11 10 16
17 23 22 21 20 19 18 24
C1 C2
C3 C4 C5
No. Function No. Function
1 TMDS data 2- 16 Hot plug detection
2 TMDS data 2+ 17 TMDS data 0-
3 TMDS data 2/4 shield 18 TMDS data 0+
4 N.C. 19 TMDS data 0/5 shield
5 N.C. 20 N.C.
6 DDC clock 21 N.C.
7 DDC data 22 TMDS clock shield
8 23 TMDS clock +
9 TMDS data 1- 24 TMDS clock -
10 TMDS data 1+ C1 Analogue red image signal
11 TMDS data 1/3 shield C2 Analogue green image signal
12 N.C. C3 Analogue blue image signal
13 N.C. C4
14 +5V C5 Analogue GND
15 GND
Analog vertically
synchronised signal
Analogue horizontally
synchronised signal
Power management
The monitor is based on the VESA DPMS and the
DVI DMPM standards.
To activate the monitor's Power Management
function, both the video card and the computer
must conform to the VESA DPMS standard and the
DVI DMPM standard.
DPMS: Display Power Management Signalling
*Not using USB hub
DMPM: Digital Monitor Power Management
*Not using USB hub
DPMS mode Screen Power H-sync V-sync
consumption
ON Display on 53W* Yes Yes
STANDBY No Yes
SUSPEND Display off 3W Yes No
OFF No No
DMPM mode Screen Power
consumption
ON Display on 53W*
OFF Display off 3W
DDC (Plug & Play)
This monitor supports the VESA DDC (Display
Data Channel) standard.
DDC is a signal standard for carrying out Plug &
Play functions on the monitor or PC. It transfers
information such as degree of resolution between
the monitor and PC. You can use this function if
your PC is DDC compliant and if it is set so that it
can detect the Plug & Play monitor.
There are many varieties of DDC due to the
differences between systems. This monitor works
with DDC2B.