17
E
When not adjusting brightness automatically
1. Without the OSD Menu being displayed, press
the
button or the
button.
2. Adjust by pressing the
button (darker) or the
button (lighter).
3. Press the MENU button.
The OSD Menu will disappear.
Note:
-
The OSD Menu automatically disappears
several seconds after the last command.
Manual screen adjustment
Fine adjustments can be made using On Screen
Display (OSD) Menu provided.
1. Display an image that makes the entire screen
very bright. If using Windows, you can open and
use the Adjustment Pattern on the accompanying
Monitor Settings Adjustment Disk. (p. 16)
2. Press the MENU button.
The ADJUSTMENT Menu will be displayed.
At this point relevant menu options can be
adjusted.
Each time the MENU button is pressed the next
menu is selected. (MENU 1
→
2
→
3
→
4
→
OSD Menu disappears)
Notes:
-
The OSD Menu automatically disappears
several seconds after the last command.
-
This explanation is based on using the
Adjustment Pattern (for Windows) to make
adjustments.
Adjusting the screen display
Adjusting the backlight
The backlight brightness can be set to change
automatically for use in different surroundings.
(Automatic brightness adjustment)
If the surroundings become brighter, the backlight
will become brighter.
If the surroundings become darker, the backlight will
become darker.
The brightness sensor measures the brightness of
the surrounding environment. Never place anything
in front of the brightness sensor.
Use the BRIGHT button to switch between auto-
matic brightness adjustment or no automatic bright-
ness adjustment.
Automatic brightness adjustment
Press BRIGHT button
ÇÈ
. Press BRIGHT button
No automatic brightness adjustment
Notes:
-
The OSD Menu automatically disappears
several seconds after the last command.
-
On the screen that appears after the values have
been set, the brightness can be further adjusted
by pressing the
and
buttons.
Adjusting the brightness
Carry out the commands without the On Screen
Display (OSD) Menu displayed. If the OSD Menu is
displayed, press the MENU button (several times
may be required) and begin when the OSD Menu
has disappeared.
When adjusting brightness automatically
Using the adjusted backlight brightness as a base,
the brightness can be adjusted automatically.
1. Without the OSD Menu being displayed, press
the
button or the
button. The BRIGHT bar will
appear at the bottom section of the screen.
2. Adjust by pressing the
button (darker) or the
button (lighter).
Depending on the brightness of the surrounding
environment, the parameters for adjustment may
be limited.
3. Press the MENU button.
The OSD will disappear.
