Sharp LL-M17W1 - WXGA LCD Computer, Руководство по эксплуатации

Страница: 22 / 196

E20
Adjusting the computer display (AUTO ADJUSTMENT)
When using the monitor as a computer display for
the first time or after having changed the system
settings during use, perform an automatic screen
adjustment. “CLOCK”, “PHASE”, “H-POS”, and “V-
POS” will be set to their optimum states.
MAIN
POWER
VOL/BRIGHT
CH
MENU
INPUT
POWER
PC AV2 AV1 TV
FREEZE VIEW MODE PIP
SLEEP
ENTER
MENU
BRIGHT
MODE
BRIGHT
DISPLAY CC MTS MUTE
VOL
CH
FLASHBACK
ENTER
/
BRIGHT
MODE
1. Press the MAIN POWER button to turn on the
monitor.
When the power LED lights red, press the
POWER button on the remote control.
2. Select the PC mode using the INPUT button
(monitor) or the PC button (remote control).
When using the INPUT button (monitor), each
time you press it, the input changes in the
following order:
PC
→
Number (TV)
→
AV1
→
AV2
→
PC...
3. Turn on the computer, and then display an image
that makes the entire screen display light colors
(such as a light desktop background).
If you are running Windows, you can use the
Adjustment Pattern on the accompanying Utility
Disk (see page E31).
4. Display the MENU screen using the MENU
button.
The cursor is positioned at “ADJUSTMENT”.
MENU
<
PC
>
ADJUSTMENT
>>
GAIN CONTROL
>>
COLOR CONTROL
>>
MODE SELECT
>>
PICTURE IN PICTURE
>>
5. Press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote control).
The ADJUSTMENT menu will be displayed.
ADJUSTMENT
<
PC
>
RETURN
AUTO
CLOCK
[ 127 ]
>>
PHASE
[ 16 ]
>>
H-POS
[ 200 ]
>>
V-POS
[ 50 ]
>>
RESET
6. Press the ENTER/BRIGHT MODE button
(monitor) or the ENTER button (remote control)
to auto-adjust the settings.
The screen will go dark and “ADJUSTING” will
be displayed. After a few seconds, the
ADJUSTMENT menu will return.
7. Press the INPUT button (monitor) or the MENU
button (remote control).
Adjustment is complete.
Notes:
- When you are using the 1280 x 768 or 1024 x
768 mode, specify the horizontal resolution of a
768-line screen in the MODE SELECT menu.
(See page E34.)
- It may not be possible to achieve correct
adjustment with the first automatic adjustment. In
such a case, try repeating the automatic
adjustment 2 or 3 times.
- If necessary due to any of the following, manual
adjustments (page E31) can be performed after
the automatic adjustment.
- When further fine adjustment is needed.
- When the computer’s video input signals are
Composite Sync or Sync on Green. (Automatic
adjustments may not be possible.)
- When “OUT OF ADJUST” is displayed. (When
the screen displays an entirely dark image, the
automatic screen adjustment may be disabled.
When making an automatic adjustment, be
sure to either use the Adjustment Pattern or try
displaying an image that makes the entire
screen very bright.)
- Automatic adjustment may not be achieved
correctly depending on what is displayed on the
screen - moving pictures or the MS-DOS prompt
etc.
g01.P65 8/22/2003, 6:02 PM 20