Sharp LC-60UQ10E, Руководство по эксплуатации

Страница: 61 / 93

59
Connecting a PC
HDMI connection
PC HDMI 1, 2, 3 or 4 terminal
n
HDMI-certified cable (commercially available)
PC HDMI 2 terminal*
o
ø 3.5 mm stereo
minijack cable
(commercially
available)
p
DVI/HDMI cable
(commercially
available)
* When using the HDMI 2 terminal, you must select the
proper item in the “Audio select” menu depending on
the type of HDMI cable connected (refer to page 46 for
details).
Analogue connection
PC PC terminal*
q
RGB cable
(commercially
available)
r
ø 3.5 mm stereo
minijack cable
(commercially
available)
PC PC terminal*
s
DVI/RGB conversion
cable
(commercially
available)
t
ø 3.5 mm stereo
minijack cable
(commercially
available)
* When using the PC terminal, you must select
“Video+Audio” in the “Audio select” menu (refer to page
46 for details).
NOTE
• For PC-connection via the PC terminal, a cable with
ferrite cores is recommended.
• The PC input terminals are DDC 2B-compatible.
• Refer to page 61 for a list of PC signals compatible with
the TV.
Displaying a PC image on the TV
Selecting the picture size
You can select the picture size.
1
Press
f
.
• The “Wide mode” menu displays.
2
Press
f
or
a/b
to select the desired item.
EXAMPLE
Normal Full
Item
Normal
Keeps the original aspect ratio in a full
screen display.
Cinema
For letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Full An image fully fills the screen.
Dot by Dot
Displays an image with the same
number of pixels on the screen.
NOTE
• You can also select an item from the “Wide mode” menu
(Page 45).
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 45 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
• The PC terminal is not compatible with 480i/576i/1080p
signals.
Connecting a PC