27
LC-40LE730
LC-46LE730
3. Remote control key operation and description of display in adjustment process mode.
1. key operation
Remote control key
Keyboard unit
Function
Cursor (▼/▲ )
P (
s
/
r
)
Moving an item (line) by one (up/down) on “Sharp Factory Menu”
or submenus.
OK
b
Selecting a submenu on lines 5 to 12 of “Sharp Factory Menu” or
executing a function.
Cursor (◄/►)
V (+/-)
Changing a selected item setting value.
MENU
MENU
Exit of adjustment mode.
Return to “Sharp Factory Menu” from a submenu.
The required input mode should be switched previously to enter the Service Mode.
CAUTION: Use due care in handling the information described here lest the users should know how to enter the
adjustment process mode. If the settings are tampered with in this mode, unrecoverable system
damage may result.
4. Description of display
Figure 1: Main Service Adjustment Menu
← Informative (Main microprocessor version).
← Informative.
← Informative (Remote Control/Keyboard…).
← Press “OK” to go to INIT submenu.
← Press “OK” to go to ETC submenu.
← Press “OK” to go to PUBLIC MODE submenu.
← Press “OK” to go to SMARTLOADER submenu.
← Press “OK” to go to ADC ADJUST submenu.
← Press “OK” to go to GAMMA submenu.
← Press “OK” to go to SYSTEM INFORMATION submenu.
← Informative (Main microprocessor version).
← Informative (Main microprocessor version).
← Informative.
← Informative.
← Informative (Remote Control/Keyboard…).
← Informative (Remote Control/Keyboard…).
← Press “OK” to go to INIT submenu.
← Press “OK” to go to INIT submenu.
← Press “OK” to go to ETC submenu.
← Press “OK” to go to ETC submenu.
← Press “OK” to go to PUBLIC MODE submenu.
← Press “OK” to go to PUBLIC MODE submenu.
← Press “OK” to go to SMARTLOADER submenu.
← Press “OK” to go to SMARTLOADER submenu.
← Press “OK” to go to ADC ADJUST submenu.
← Press “OK” to go to ADC ADJUST submenu.
← Press “OK” to go to GAMMA submenu.
← Press “OK” to go to GAMMA submenu.
← Press “OK” to go to SYSTEM INFORMATION submenu.
← Press “OK” to go to SYSTEM INFORMATION submenu.
SHARP FACTORY MENU
Main version
LE730E v1.253 790.173.78 v14
FRC
2.3.0.180.390.290
Hardware SHARP 691
Normal standby cause
Remote control
INIT
ETC
PUBLIC MODE
SMARTLOADER
ADC ADJUST
GAMMA
SYSTEM INFORMATION
No. Description
Display specifi cation
(1) Service Information
Current Software version and others.
(2)
Item name
Submenus to be checked or adjusted (by pressing “OK” button)
(3)
Factory init and Inch setting
Are shown on INIT submenu
(2)
(3)
(1)
Содержание LC-40LE730E
Страница 44: ...44 LC 40LE730 LC 46LE730 NOTES ...
Страница 47: ...LC 40LE730 LC 46LE730 47 40 46 MAIN UNIT BLOCK DIAGRAM ...
Страница 75: ...75 LC 40LE730 LC 46LE730 Control Button Unit PWB RUNTKA880WJPZ2 ...
Страница 91: ...91 LC 40LE730 LC 46LE730 NOTES ...