15
16
Specifi cations
Item
Model
LC-32LE260M
LCD panel
80 cm
Resolution
1,049,088 pixels (1366
g
768)
Video Colour System
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV
Function
TV-Standard
PAL: B/G, D/K, I SECAM: B/G, D/K, K/K
1
NTSC: M
Receiving
Channel
VHF/UHF
43.25—863.25 MHz
CATV
S1—S41ch (including Hyperband)
TV-Tuning System
Auto Preset 99 ch
STEREO/BILINGUAL
NICAM: B/G, I, D/K A2 stereo: B/G
Viewing angles
H : 176º V : 176º
Audio amplifi er/Speakers
5 W
g
2 / 4
g
7 cm 2pcs
Terminals
Antenna input
UHF/VHF 75
q
DIN type
INPUT 1 / INPUT 2
HDMI (HDMI input, PC input)
INPUT 3
VIDEO in, AUDIO in, COMPONENT in
INPUT 4
VIDEO in, AUDIO in
OUTPUT
AUDIO out, Headphone ( 3.5 mm stereo)
USB
USB
USB device/File system
USB Memory / FAT/FAT32
Photo fi le format
JPEG (.jpg) (DCF2.0 compliant). Progressive format jpeg fi les are not supported.
Music fi le format
(Files may not be playable
depending on the bitrate)
MP3 (.mp3) Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k, 96 k, 112 k, 128 k, 160 k,
192 k, 224 k, 256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
OSD language
English/Simplified Chinese/Arabic/French/Portuguese/Russian/Persian/Thai/
Vietnamese/Indonesian
Power Requirement
AC 110—240 V, 50/60 Hz
Power Consumption
41 W (1.0 W Standby)
Dimensions
without stand
739 (W)
g
440 (H)
g
93 (D) mm
with stand
739 (W)
g
482 (H)
g
174 (D) mm
Weight
5.7 kg (without stand) / 6.5 kg (with stand)
Operating Temperature
0°C — 40°C
• As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualifi ed service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or
mounting that results in accident or injury.
• Carefully read the instructions that come with the bracket before beginning work.
Appendix
Troubleshooting
The problems described below are not always caused by malfunctions. Check the TV again before having the
TV serviced.
Problem Possible
Solution
• No power.
• Check if you pressed
POWER
on the remote control unit. (See page 6.)
If the indicator on the TV lights up red, press
POWER
.
• Is the AC cord disconnected?
• Has the power been turned on? (See page 6.)
• Unit cannot be operated.
• External infl uences such as lightning, static electricity, etc., may cause improper
operation. In this case, operate the unit after fi rst turning the power off the TV or
unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (
e
,
f
) aligned? (See page 5.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fl uorescent lighting?
• Is a fl uorescent light shining on the remote control sensor?
• Picture is cut off.
• Are screen mode adjustments such as picture size made correctly? (See page 12.)
• Strange colour, light colour, or
dark, or colour misalignment.
• Adjust the picture tone. (See page 9.)
• Is the room too bright? The picture may look dark in a room that is too bright.
• Check the colour system setting. (See pages 8, 11.)
• Check the “HDMI Auto View” setting. (See page 10.)
• Power is suddenly turned off.
• The unit’s internal temperature has increased.
Remove any objects blocking the vent or clean.
• Check the “ECO” setting. (See page 10.)
• Is the sleep timer set? (See page 5.)
• No picture.
• Is the connection to external equipment correct? (See page 4.)
• Is the picture adjustments correct? (See page 9.)
• Is the antenna connected properly? (See page 3.)
• Is “On” selected in “Audio Only”? (See page 11.)
• No sound.
• Is the volume too low? (See page 5.)
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to changes in temperature. This does not affect the TV’s
performance.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, offi ce), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near
a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.
Storage
temperature:
f
20°C to
e
60°C.
Clearing the password
1
Repeat steps 1 to 2 in
Setting a password
. (See page 10.)
2
The password input screen displays.
3
If you enter “3001” using
0 – 9
, the “Child Lock” setting menu will be displayed.
4
Enter the 4-digit number as a password using
0 – 9
. The new password is now set.
LC-32LE260M_G236_EN.indd 8
LC-32LE260M_G236_EN.indd 8
7/2/2014 4:49:09 PM
7/2/2014 4:49:09 PM
