![Sharp LC-32BT8 Скачать руководство пользователя страница 48](http://html.mh-extra.com/html/sharp/lc-32bt8/lc-32bt8_service-manual_1254347048.webp)
48
LC-26GA5E
LC-32GA5E
LC-32/37GD8E/RU
LC-32/37BT8E/RU
32
LC-32/37GD8E/RU
LC-32/37BT8E/RU
TROUBLESHOOTING TABLE
(Continued)
<On input of the tuner
>
(U/V)>
No picture appears on LCD during the tuner
reception.
(U/V) reception.
Checklist:
1) Is "INPUT SOURCE" button on the remote control set up correctly?
···
See the operation manual and set "INPUT SOURCE" to "TV".
2) Is MENU-PICTURE-Contrast/Brightness set to "MIN"?
···
Set it to an appropriate level.
3) Is ANT-CABLE disconnected or connected improperly?
···
Connect it correctly as per the operation manual.
NO
Is level of pins (4) and (5) of
tuner (TU201) and pins (10)
and (11) of IC201 (IF-
DEMOD) at H?
These are communications
lines for control (I2C). Follow
the path and check whether
they are forced to L
(PULL_DOWN).
YES
NO
Is the video signal (IF) sent
from pin (8) of tuner
(TU201)?
Check the tuner (TU201)
and peripheral circuits.
NO
YES
YES
YES
Is video signal sent from pin
(17) of IC201 (IF-DEMOD)?
Check FL201 (SAW-FIL),
IC201 and peripheral
circuits.
NO
Is the video signal VIN1
(ATUNER-CVBS) sent to pin
(191) of IC3002 (VCT)?
Check IC201 (IF-DEMOD),
CONNECTOR
(P201/SC2705) and
peripheral circuits.
NO
YES
Is LVDS video signal (LVDS_0N/0P-3N/3P) sent to pins
(141)/(140) - (129)/(128) of IC3002 (VCTP), and is CLK signal
(LVDS_CN/CP) sent to pins (132)/(131)?
Check pins (192)/(170)/(133) of BU3.3V line of IC3002 (VCTP),
pins (185)/(169)/(142) of 1.8V line and peripheral circuits.
NO
YES
Is LVDS video signal (LVDS_0N/0P-3N/3P) sent to pins (12)/(13) -
(24)/(25) of CONNECTOR CN1 of LCD-CONT-UNIT, and is CLK
signal (LVDS_CN/CP) sent to pins (21)/(22)?
Check CONNECTOR (P2305, CN1) and HARNESSWIRE (LV).
NO
YES
Is power (LCD5V) supplied to pins (2)
–
(5) of CONNECTOR CN1
in LCD-CONT-UNIT?
YES
Replace LCD-CONT-UNIT.
Is LCD5V supplied to pins (31)
–
(28) of CONNECTOR (P2305)?
No picture on the display (1)
Check HARNESSWIRE (LV).
Is IC 1705 supplying LCD 5V?
NO
Check IC1705 and peripheral parts.
YES
NO
Change IC1705.
YES
Troubleshooting Table (continued)