46
LC-26GA5E
LC-32GA5E
LC-32/37GD8E/RU
LC-32/37BT8E/RU
31
LC-32/37GD8E/RU
LC-32/37BT8E/RU
TROUBLESHOOTING TABLE
(Continued)
NO
YES
Check power supply and pins (9) and (10)of IC2704(SW) and
audio signal input of pins (4) and (11) of IC2704.
Check Q4601
...
Q460
7
and their peripheral circuits.
NO
Check R272 and R273.
Are scrambled images not displ
a
yed?
YES
No video output during DTV reception. Colors of Images are not right.
NO
DIGITAL UNIT:
Is audio signal fed to pins (5) and (10) of IC4604 (OP-AMP)?
Are video signals (R/G/B,CVBS) send from the
C4636/C4637/C4638 and emitters of Q4607?
Check power supply and pin (1) of IC2705(SW).
NO
YES
MAIN UNIT:
Is video signal (CVBS) sent from pin (2) of IC2705(SW).
YES
Are video signals (R/G/B,CVBS) fed from pins (179),(180),(181)
and (184) of IC3002?
YES
NO
MAIN UNIT:
Is audio signal sent to pin (3) and (13) of IC2704 (SW)?
YES
Is audio signal sent from pins (7) and (8) of IC4604(OP-AMP)?
Check R4002(AD2pin) and IC4001(D-Processor).
Check power supply of IC4604(OP-AMP) and its peripheral circuits.
NO
YES
NO
YES
No audio output during DTV reception. Sound is low.
D-TUNER UNIT:
Is data FED[0:7] sent from pins (3),(4),(5),(6),(8),(9),(10) and (11)
of P202?
DIGITAL UNIT:
Check 5V output of pin (1) of IC4702.
Check 5V of pin (6) of Q4401.
NO
YES
Check R4011(AC8pin),R4013(AC9pin) and IC4001(D-Processor).
DIGITAL UNIT:
Are video signals (R/G/B,CVBS) sent from
C4639/C4640/C4641/C4625?
34
LC-32/37GD8E/RU
LC-32/37BT8E/RU
TROUBLESHOOTING TABLE
(Continued)
<When EXT1 is used for external input>
No EXT1-Composite output of the external
input system.
Checklist:
1) Is "INPUT SOURCE" button on the remote control set up correctly?
···
See the operation manual and set "INPUT SOURCE" to "EXT1".
2) Is MENU-PICTURE-CONTRAST/BRIGHTNESS set to "MIN"?
···
Set it to an appropriate level.
3) Check the connection to the external device
···
Connect it correctly as per the operation manual for the device.
No EXT1-RGB output of the external input
system.
No EXT1-Y/C output of the external input
system.
NO
Is composite video
signal sent to pin
(20) of SCART1
(J1101)?
Check external
connection, input
setting, SCART1
(J1101) and
peripheral circuits.
Is RGB signal sent
to pins (15), (11)
and (7) of SCART1
(J1101)?
NO
Check external
connection, input
setting, SCART1
(J1101) and
peripheral circuits.
Is Y/C signal sent
to pins (20) and
(15) of SCART1
(J1101)?
NO
Check external
connection, input
setting, SCART1
(J1101) and
peripheral circuits.
YES
YES
YES
NO
Is composite video
signal (VIN_1)
sent to input
terminal pin (6) of
IC2702 (SW)?
Check
CONNECTOR
(SC2702/P1101),
SCART1 (J1101)
and peripheral
circuits.
Is RGB signal
(R1/G1/B1=VIN_6/
5/9) sent to input
terminal pins
(187), (175) and
(182) of IC3002
(VCT)?
NO
Check
CONNECTOR
(SC2702/P1101),
SCART1 (J1101)
and peripheral
circuits.
Is Y/C signal
(VIN1=Y1/C1) sent
to input terminal
pins (190) and
(187) of IC3002
(VCT)?
NO
Check
CONNECTOR
(SC2702/P1101),
SCART1 (J1101)
and peripheral
circuits.
YES
NO
Is composite video
signal
(CVBS1=VIN2)
sent to input
terminal pin (190)
of IC3002 (VCT)?
Check IC2702
(SW) and
peripheral circuits.
YES
NO
YES
YES
Is LVDS signal (LVDS_0N/0P-3N/3P) sent from pins (141) and (140) - (129) and (128) of IC3002
(VCTP), and is CLK signal (LVDS_CN/CP) sent from pins (132) and (131)?
Check pins (192), (170) and (133) of BU3.3V
power line and pins (185), (169) and (142) of
BU1.8V power line of IC3002 (VCTP), and
peripheral circuits.
YES
YES
Replace LCD-CONT-UNIT.
YES
NO
NO
Is LVDS signal (LVDS_0N/0P-3N/3P) sent to pins (12) and (13) - (24) and (25) of CONNECTOR
CN1 in LCD-CONT-UNIT, and is CLK signal (LVDS_CN/CP) sent to pins (21) and (22)?
Check CONNECTOR (P2305, CN1) and
Harness Wire (LV).
Is power (LCD5V) supplied to pins (2)
–
(5) of CONNECTOR CN1 in LCD-CONT-UNIT?
No picture on the display (3)
Check HARNESSWIRE (LV).
Is IC1705 supplying LCD 5V?
NO
Check IC1705 and peripheral parts.
YES
NO
Change IC1705.
Is LCD5V supplied to pins (31) - (28) of
CONNECTOR (P2305)?
YES
Troubleshooting Table (continued)
