EN-11
ENG
LI
SH
HOW TO CHANGE VARIOUS
SETTINGS
Type of setting
Function
Setting
Light Control
You can select the brightness of the Front Display.
Auto
(default)
Light automatically switches based on room brightness.
Room bright-
ness
Front Display
ALL MODE
(Except SLEEP)
SLEEP MODE
Bright
Brighter
Darker
Dark
Darker
Turn off
Darker
Turn off
When set to “Turn off”, the “Darker” light illuminates for 3
seconds after operation starts and then the light turns off.
The Humidify Light flashes darker only when the main unit
needs water.
The Unit Replacing Light flashes darker only when the
Plasmacuster ion generating unit need to be replaced.
Water-filling Indicator
You can set the Main Unit to make a beeping sound
when the Water Tank is empty.
CANCEL
(default)
ON
The Humidify light flashes with a sound of beep which
lasts for 10 seconds.
When SLEEP Mode is set on, once the Light Sensor de-
tects that it is dark in the room, it will not beep.
Auto Restart
If the Main Unit is unplugged or if there is a power
failure, the Main Unit will resume operation with the
previous settings after power is restored.
CANCEL
(default)
ON
Adjusting Sensor Sensitivity (F4-F6)
Light Sensor
Low
Dust(sensitive) Sensor
Standard
(default)
Odour Sensor
High
Pre-filter auto cleaning function
Pre-filter auto cleaning function can be set.
ON
(default)
The dust on the Pre-filter will be cleaned every 48 hours.
CANCEL
No auto cleaning for the Pre-filter.
In order to keep the air clean, the unit will clean the Pre-fil-
ter and collect the dust automatically one month
(about 720 hours) after previous cleaning.
KI-G75EU_10_languages_A.indb 11
2019-02-18 10:51:52
Содержание KI-G75EU
Страница 222: ...KI G75EU_10_languages_A indb 1 2019 02 18 10 54 54 ...
Страница 223: ...KI G75EU_10_languages_A indb 2 2019 02 18 10 54 54 ...