EN-7
ENGLISH
Cautions on wiring the Car Adapter
• Do not let the cord touch or get caught in the seat rails, shift lever
or other moving parts.
• Wire in such a way that the cord does not get in the way of the
driver.
• Consider the movement of the seats (forward / backward, swiveling
or reclining) when wiring.
• Do not bend the cord extremely or compress it.
Cautions on installation
• Separate the product from
electronic key of vehicle by 30 cm
or more. Otherwise, it may
interfere with electronic wave of
product and the electronic key may
not be recognized.
• Be sure to place in a stable
location. (Do not put in a external
cup holder or other unstable
place.)
• Do not obstruct the air inlet or outlet.
• Keep the product away from the vehicle’s in-glass antenna. Failure
to do so could cause interference on the radio.
• If there should be interference on a TV or radio located in the same
car, or if an atomic clock in the car should not display the time
properly, move the product away from the TV, radio, atomic clock,
etc.
• If the product is installed directly in front of the car climate control’s
outlets, the product could get hot when the climate control is
operating in the heating mode.
• The product could get scratched by the vibrations of the vehicle,
etc.
• It might be impossible to use for some types of cars.
OM_IG-NX2_EN_MS_VT_CS.indb EN-7
OM_IG-NX2_EN_MS_VT_CS.indb EN-7
31/5/2564 BE 16:50
31/5/2564 BE 16:50