Sharp IG-BC2A, Руководство по эксплуатации

Страница: 10 / 64

E-8
CLEANING AND MAINTENANCE
MAIN UNIT
Every month or more often if necessary
<For Stubborn Dirt> Use water and a mild detergent. And then, wipe
with a wet cloth. Make sure to dry out the main unit.
FILTER
Every week or more often if necessary
Wipe with a dry soft cloth. t>
The fi lter must be cleaned regularly in order to maintain the ion density.
Filter soiling depends on the usage environment, so clean the fi lter about once
a week or whenever the fi lter is clogged, even if the Filter Clean Light has not
turned on.
Gently remove dust
f r o m t h e f i l t e r o f
back side by using a
vacuum cleaner. <For Stubborn Dirt>
• Remove and rinse in water. (Use a soft sponge if
the dirt does not come off easily.)
Be careful the cushioning material does not come
off.
1
• Do not press the vacuum cleaner strongly against the fi lter, or the fi lter could be damaged.
• If using synthetic kitchen detergent, rinse well to remove all traces of the
detergent. Also, be sure to dry the fi lter in the shade.
Filter
Rinse Wipe with a dry cloth.
Reattach
Press the Reset Button for at
least 3 seconds.
2
Once cleaning is completed, connect
the car adapter, then press and hold on
the Reset Button for at least 3 seconds
to turn off the fi lter clean light.
RESET
(Press 3sec.)
MODE
RESET
(Press 3sec.)
MODE
FILTER
CLEAN
UNIT
Even if the Filter
Clean Light is off,
press and hold on
the Reset Button for
at least 3 seconds
after cleaning.
Filter Clean Light
Filter Clean Light will be lit after
approx. 3 months (approx. 720
hours), when operated 8 hours a day.
Reset Button
Filter Clean
Light
When the Reset Button is pressed and
held on for at least 3 seconds, the light
fl ashes twice then turns off.
(Dry in the shade.)
IG-BC2A.EN.indd 10 IG-BC2A.EN.indd 10 2010/01/12 9:42:40 2010/01/12 9:42:40