E-1
Special notes
For Users in U.S.:
Explanation of Graphical Symbols:
7KHOLJKWQLQJÀDVKZLWKDUURZKHDGV\PEROZLWKLQ
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous volta-
ge” within the product’s enclosure that may be of
VXI¿FLHQWPDJQLWXGHWRFRQVWLWXWHDULVNRIHOHFWULF
shock to persons.
The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence of
LPSRUWDQW RSHUDWLQJ DQG PDLQWHQDQFH VHUYLFLQJ
instructions in the literature accompanying the
appliance.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss
or theft, please record below the model number and
serial number which are located on the rear of the unit.
Please retain this information.
Model number
..............................
Serial number
..............................
Date of purchase
..............................
Place of purchase ..............................
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not instal-
led and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●
Reorient or relocate the receiving antenna.
●
Increase the separation between the equipment
and receiver.
●
Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
●
&RQVXOW WKH GHDOHU RU DQ H[SHULHQFHG UDGLR79
technician for help.
Warning:
&KDQJHV RU PRGL¿FDWLRQV WR WKLV XQLW QRW
expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure Statement
This device complies with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. It must
not be co-located or operating in conjunction with any
other antenna or transmitter.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received,
including interference that may cause undesired
operation.
This equipment should be installed and operated with
a minimum distance of 20 cm between the radiator and
person’s body.
Note to CATV system installer:
7KLVUHPLQGHULVSURYLGHGWRFDOOWKH&$79V\VWHPLQVWDOOHU¶VDW
-
tention to Article 820 of the National Electrical Code that provides
JXLGHOLQHVIRUSURSHUJURXQGLQJDQGLQSDUWLFXODUVSHFL¿HVWKDW
the cable ground shall be connected to the grounding system of
the building, as close to the point of cable entry as practical.
