E-17
Notes:
●
This product switches to
Bluetooth
function automatically when NFC tagging was done by your device.
●
If your device does not support NFC, or if you wish to listen to audio via
Bluetooth
connectivity without NFC;
refer “
Pairing with other
Bluetooth
source devices
” on the next page.
●
Some
Bluetooth
devices will connect to this product automatically when the device or its
Bluetooth
mode
was turned on. In such case, it will also change the function selection of this product. If you do not want it to
connect automatically, please disable
Bluetooth
on your device.
●
It takes about 6-8 seconds for a
Bluetooth
enabled device (eg. smartphone) to establish
Bluetooth
connection
with this unit via NFC or manual connection.
●
If “Empty tag” or similar message appears on your device, touch the device again to the NFC detection area
on the main unit.
■
NFC connection for audio playback
Check that:
●
Your device (smartphone/tablet) has an NFC
function.
●
NFC function on your device is enabled.
●
Screen lock function of the device is off.
●
This unit is not in low power consumption
mode.
1
Touch your device to the NFC detection area on the main unit. (NFC detection area of your device
must touch to the NFC detection area of the main unit.)
NFC
detection
area
Device
Main
unit
2
A pop-up window asking whether to proceed with the
Bluetooth
connection appears on the device.
Select <YES>.
●
The ‘connected’ message appears when the connection is complete.
3
Playback will start automatically, otherwise press play (on remote control or source device).
●
Sound will be heard from the speakers of this unit via audio streaming.
●
Your device must be within 32 feet (10 meters) from the unit.
Bluetooth
operation buttons (remote control only)
Press the button to play
or pause.
Press the button to
skip up.
Press the button to skip
down.
Bluetooth one touch connection via NFC (continued)
