36
03/10/24
HTCN400_500DVA_A3.fm
92LCN400A0270
HT-CN400DVA
HT-CN500DVA
CD
, C
D
-R
an
d CD-R
W
Op
eration
- CD
ope
ra
ti
on -
CD operation
The following playback functions are the same as DVD or VCD opera-
tions.
Page
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To locate the beginning of a chapter (track) (skip) . . . . . . . . . . . . . . . . . . . . . . 26
Fast forward/Fast reverse (search) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
To play repeatedly (repeat play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
To play the contents between the specified points repeatedly (A-B repeat) . . 31
To change the audio channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To change the display on TV screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
To start playback from the desired point (direct play) . . . . . . . . . . . . . . . . . . . . 35
!
To play in the desired order
(programmed play)
You can play back the desired tracks in a specific order.
Maximum of 99 tracks can be programmed.
When playing SVCD or VCD, cancel the P.B.C. (playback control) (see page 35).
To change the programmed contents:
Repeat the above procedures from step 1.
Programmed contents will be cleared when you perform the following
operations:
"
Press the or PROG button in the stop mode.
"
Switch the input or remove the discs.
"
Set to the stand-by mode.
Notes:
PRESET
ADJ/VOL
9
8
7
6
5
4
0
>10
3
2
1
ENTER
SLEEP
ST/MO
TUNING
DISPLAY
LANGUAGE
MUTE
PROG
MENU/PBC
NTSC/PAL
STEP
A-B
REPEAT
ANGLE
DIRECT
LISTENING
SLOW/MEMORY
TITLE
ZOOM
AUDIO
RETURN
MODE
SUBTITLE
SET UP
OPEN/
CLOSE
ON/
STAND-BY
9
8
7
6
5
4
0
>10
3
2
1
PROG
REPEAT
1
Whilst stopped, press the PROG button.
TV screen
Unit display
2
Enter a track number with the direct number buttons.
"
Repeat the procedure above to enter other track numbers.
"
If you enter the wrong number, press the PROG button and then start over
from step 1.
"
If the track number is 2 digits or more, press ">10" and enter the number.
Example:
To select track 14: Press ">10" and "4".
3
Press the / button to start play.
"
Programming is not possible whilst paused or during playback.
"
Sequential programming does not work if the disc disables programming or does
not have track information.
"
During programmed play, repeat play can be performed by pressing the REPEAT
button (see page 30).
A - B
REPEAT 1
SLEEP
CHP
PRESET
KHz
MHz
PROG
PROGRAM P00:00
PROG
A - B
REPEAT 1
SLEEP
CHP
PRESET
KHz
MHz
PROG
PROGRAM P01:02
