13
03/10/24
HTCN400_500DVA_A2.fm
92LCN400A0270
HT-CN400DVA
HT-CN500DVA
Sys
tem Connec
tions
- S
p
e
a
k
e
r c
onne
c
ti
o
n /
Ae
ri
a
l c
onn
e
c
tion -
!
Connecting speaker wires
To prevent accidental short circuits between and terminals, connect the
speaker wires to the speakers first and then to the unit.
Caution:
"
The supplied speaker for HT-CN400DVA is designed exclusively for HT-
CN400DVA. The speaker for HT-CN500DVA is exclusively for HT-CN500DVA.
Do not connect speakers for HT-CN400DVA or HT-CN500DVA to other equip-
ment. Also, do not connect other speakers to HT-CN400DVA or HT-
CN500DVA. It may cause malfunction.
"
Do not mistake the and , and right and left terminals of the speaker wires. (The
right speaker is placed on the right when you face the unit.)
Aerial connection
Installing the AM loop aerial:
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
Make sure to leave the AC power lead disconnected when connecting the
speakers.
"
Do not let the bare speaker wires touch each other.
"
Do not stand or sit on the speakers. You may be injured.
"
Do not short-circuit the speaker wires. If the power is
turned on, malfunction may occur.
"
When disconnecting the speaker wires, unplug the AC
power lead, and then disconnect the speaker wires from
the main unit.
Red
Red
Red
Black
Black
Black
Red
Black
1
Connect the wires to the speakers.
2
Connect the other end to the main
unit.
Incorrect
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
socket and position the FM aerial wire in the di-
rection where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM socket.
Position the AM loop aerial for optimum recep-
tion. Place the AM loop aerial on a shelf, etc., or
attach it to a stand or a wall with screws (not
supplied).
Note:
Placing the aerial on the unit or near the AC
power lead may cause noise pickup. Place the
aerial away from the unit for better reception.
< Assembling >
< Attaching to the wall >
Wall
Screws (not supplied)
FM aerial
AM loop
aerial
External FM
aerial
2
