Sharp FX-J80A, Руководство по эксплуатации

Страница: 13 / 32

EN-11
1.
Remove the unit cover,
and pull out the unit
holder.
2.
Remove dusts from the
electrode section.
3.
Insert the unit holder
in the Main Unit, and
install the unit cover.
CAUTION
• Do not clean with other unit cleaning brush. Doing so could lead to failures in the unit.
• A bent electrode could be cut off and dropped during the cleaning process, but it will not change the performance.
• Do not touch the electrode directly. Doing so could lead to pain/itching.
• Do not transform the electrode section. Doing so can damage it.
• Do not touch the connection terminals. Doing so can damage them.
NOTE How to clean hard to remove dirt.
Pre-Filter
1. Add a small amount of neutral detergent
to water and soak about 10 minutes.
CAUTION
Do not apply excessive pressure when
scrubbing the pre-filter .
2. Rinse off the neutral detergent pre-filter with clean water.
3. Completely dry the filter in a wellventilated area.
Sensor Filter
1. Remove the Pre-Filter.
2. Remove the sensor filter.
3. If the sensor filter is very dirty, wash it
with water and dry it thoroughly.
Plasmacluster Ion Generating Unit
(electrode section)
Wipe with a dry, soft cloth
Remove the dust gently with a cleaning
tool such as a vacuum cleaner.
MAIN UNIT / PRE-FILTER (BACK PANEL)
Sensor
Filter
Unit Cleaning Brush
Electrode Around the base
Before cleaning After
cleaning
Pre-Filter
(Back Panel)
Remove the claw of unit holder ( ),
and remove the Plasmacluster Ion
Generating Unit ( ).
1
2
UNIT REPLACEMENT INDICATOR
When the total operation time exceeds 17,500
hours, the Unit Replacement indicator will flash
to indicate that the Plasmacluster Ion Generating
Unit needs replacement.
Operating time
17,500 hours
Flash slowly
Replace the Plasmacluster
Ion Generating Unit
19,000 hours
Flash quickly
Stop the emission of the
Plasmacluster ions.
* The replacement time is not related to the selected
operation mode.
Replacement Plasmacluster Ion Generating Unit Model
Consult your dealer when purchasing a replacement
Plasmacluster Ion Generating Unit.
IZ-PF10XP-HK
1
2
1
2
Disposing of Plasmacluster Ion Generating Unit
Dispose of used Plasmacluster Ion Generating Unit
according to local laws and regulations.
material: • Polystyrene terephthalate • electronic parts
ENG
LI
SH
FX-J80A_EN_090118.indd 11 10/5/2561 BE 10:39 AM