EN-14
TROUBLESHOOTING
SYMPTOM
REMEDY (not a malfunction)
Dust and smoke are not removed.
• Is
fi
lter still in the plastic bag? Please take it out.(Page 6)
• Clean or replace the
fi
lter if they appear to be heavily soiled.
(Page 10,12)
A clicking or ticking sound is heard
from the main unit.
• Clicking or ticking sounds may be audible when the main unit
is generating ions.
The discharged air has an odor.
• Check to see if the
fi
lters are heavily soiled.
• Clean or replace the
fi
lters.
The Plasmacluster Ion Indicator
Light doesn’t light on.
• Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off after the
SLEEP mode is selected.
• Check to see if the Plasmacluster Ion OFF is selected.
Press
for 3 seconds to light On.
(Page 9)
•
Check to see if the Light Control OFF is selected. Press
for 3 seconds to light On.
(Page 9)
UV Indicator Light and UV Light are
turned off.
• If Catch Panel comes off or is not properly set, UV Indicator
Light and UV Light are automatically turned off by Magnet
sensor.
Please con
fi
rm whether Catch Panel is properly attached.
UV Indicator Light is
fl
ashing
• It’s replacement timing of Glue Sheet.
Please exchange to new Glue Sheet.
Then, press the MOSQUITO CATCHER Button for 3 seconds.
No mosquitoes are collected on the
Glue Sheet.
• Aren’t windows or doors opened?
• Don’t you set up in the place where the wind blows such as air-
conditioner or fan?
Try to relocate the main unit.
When the adhesive remains on
clothes, skin,
fl
oor, etc.
• Wipe with cooking oil, then wash with soap and water.
AUTO RESTART
• Even when the plug is unplugged or the breaker is thrown
during the operation, the operation resumes at the previous
operation mode and settings if the power recovers.
Any two of MODE Lights are
fl
ashing
• UV Light has failed. Please call the service center approved by
Sharp.
Before calling for service, please review the Troubleshooting chart below, since the problem may not be the
main unit malfunction.
ON
(default)
OFF
(with the main unit OFF)
(with the main unit OFF)
If the
,
,
Lights lights up
for 8 seconds, the setting is ‘ON’.
(simultaneously for
more than 3 sec.)
(simultaneously for
more than 3 sec.)
02_OM_FP-JM30B_EN.indd EN-14
02_OM_FP-JM30B_EN.indd EN-14
8/4/2562 BE 10:57
8/4/2562 BE 10:57
