Sharp FP-J60Y, Руководство пользователя

Страница: 28 / 32

EN-12
T ROU BLESH OOT I N G
Odor a nd sm oke pe rsist s.
• Check the fi lters. If they appear to be extremely
dirty, clean or replace them.
T he Cle a nline ss M onit or is blue
eve n w he n t he a ir is not cle a n.
• The air may have been dirty when the main unit
was plugged in. Unplug the main unit, wait one
minute, and then plug the main unit in again.
T he Cle a nline ss M onit or light is
re d eve n w he n t he a ir is cle a n.
• Dirty or clogged dust(sensitive) sensor openings
interfere with sensor operation. Gently clean the
sensor
fi lter or the back panel.
T he M a in U nit m a ke s a click ing or
t ick ing sound.
• The main unit may make clicking or ticking
sounds when it is generating ions.
Air discha rge d from t he M a in U nit
ha s a n odor.
• Check to see if the fi lters are extremely dirty.
• Clean or replace the fi lters.
T he M a in U nit doe s not ope rat e
w he n c iga re t t e sm oke is in t he a ir.
• Make sure the Main Unit is installed in a location
in which the sensors can detect cigarette smoke.
• Check to see if the dust(sensitive) sensor
openings are blocked or clogged. If they are
blocked or clogged, clean the sensor
fi lter or the
back panel.
T he FI LT ER Re pla c e m e nt I ndic at or
Light is fl a shing.
• Whenever after performing replacing the fi lters,
connect the power cord to an outlet and then
press the Filter Reset Button. (page 11)
T he Front Displa y is t ur ne d off.
• When Light control is set to "Auto", the light
automatically turns off when the room is dark.
Moreover, when Light control is set to "Turn off",
the light is always off. If you do not want the light
to be off, set Light control to the "Darker" setting.
(page 9)
T he Cle a nline ss M onit or cha nge s
c olor fre que nt ly.
• The Cleanliness Monitor automatically changes
color when the dust(sensitive) sensor and odor
sensor* detect impurities. If you are concerned
about the change, you can change sensor
sensitivity. (page 9)
T he M a in U nit ’s Displa y doe s not
m at ch w e at he r re por t or a not he r
hygrom e t e r or t he r m om e t e r in t he
room .
• Outdoor and indoor as well as the home
environment (the volume of traf fi c nearby, number
of stories in home, etc.) may cause a reading
different than those data.
• There is a difference in the level within the same
room.
T he Displa y indic at e s e t c .
• Time can be set in from 10 minutes to 24 hours
through the designated application.
In that case, the Timer Monitor displays
to .
ERROR DI SPLAY
If error occurs repeatedly, contact the Sharp
Service Center.
Flash quickly
• The communication between
SHARP server and the air puri fi er
is not available.
Please check Wireless Lan
Guide Book for details.
• The concentration of
Plasmacluster ion is descending.
⇒
Maintain the Plasmacluster
Ion Generating Unit (electrode
section).
• Is the the Plasmacluster Ion
Generating Unit inserted
properly?
⇒
Pull out the the Plasmacluster
Ion Generating Unit and insert it
to the end again, and then carry
out the operation again.
• Unplug the Main Unit, wait one
minute, and then plug the Main
Unit in again.