E-9
ENGLISH
MOSQUITO CATCHER
Use this function to catch mosquitoes.
Mosquito catching function (CATCH lamp) will turn on when both UV LIGHT and GLUE SHEET work
properly.
When UV LIGHT lamp is on and GLUE SHEET lamp is on, CATCH lamp is on.
When UV LIGHT lamp is off or GLUE SHEET lamp is flashing, CATCH lamp is off.
NOTE
UV Light ON
UV Light OFF
• Flashing Glue Sheet lamp indicates time to change Glue Sheet.
Replace with a new sheet.(Ref.E-15)
Press the Mosquito Catcher button for 3 seconds.
Glue Sheet lamp changes from flashing to lighting.
• Glue Sheet lamp flashes approx. 2 month (24 hours x 60 days) after you press Mosquito Catcher
button for 3 seconds.
• At the first time of using the product, after inserting the power plug in socket and turning on the
power, Glue Sheet lamp will be flashing by default. Install Glue Sheet to catch panel (
Ref.
E-7),
then press the Mosquito Catcher button for 3 seconds.
• We recommend you to keep this air purifire working as much as possible to maximize its function
except for exchanging filter and Glue sheet.
Select Max mode to catch mosquitoes more effectively.
The higher the air volume is, the easier to capture mosquitoes becomes.
CATCH lamp
UV LIGHT lamp
GLUE SHEET lamp
Press 3 seconds
flashing
When Mosquito Catcher button is pressed, UV LIGHT lamp is turned on and conversely.
UV LIGHT
off
When Catch Panel comes off, UV light is turned off automatically by
Magnet sensor. Check whether catch panel is properly attached.
UV LIGHT
flashing
When UV LIGHT lamp is flashing, UV Light has failed. Contact the
service center authorized by Sharp.
FP-GM50Y_EN.indd 9
2016/10/19 15:02:35