E-17
ENGLISH
Power supply
220 V 50 Hz
Fan
Speed
Operation
Fan Speed
MAX
MED
SLEEP
*1
Rated Power (W)
33
14
3.7~6.2
Airflow (m
3
/hour)
240
150
48~90
Recommended Room Size (m
2
)
~30
*2
High density Plasmacluster ion recommended room size (m
2
)
~23
*3
Cord Length (m)
2.0
Dimensions (mm)
394(W)×281(D)×540(H)
Weight (kg)
5.8
*1 The fan speed is automatically switched depending on the amount of impurities in the air.
*2 Size of a room which is appropriate for operating the unit at maximum fan speed.
• It indicates the space where a certain amount of dust particles can be removed in 30 minutes
(JEM1467).
*3 Size of a room in which approximately 7000 ions can be measured per cubic centimeter in the
center of the room (at a height of approximately 1.2 meters from the floor) when the product is
placed next to a wall and run at the MED operation position.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the
wall outlet, this product consumes about 1.0W of standby power.
For energy saving, unplug the power cord when the unit is not in use.
SYMPTOM
REMEDY (not a malfunction)
GLUE SHEET Lamp is flashing
Peel off one layer or exchange a new Glue Sheet set when all
layers have been used.
Then, press the Mosquito Catcher button for 3 sec.
No mosquitoes are collected on the
Glue Sheet.
• Try relocating the unit.
• Peel off one layer or exchange a new Glue Sheet set.
When the adhesive glue remains on
clothes, skin, floor, etc.
• Wipe with cooking oil, then wash with soap and water.
SLEEP lamp is flashing.
• Fan motor error. Turn the power OFF. Wait one minute, and
then turn the power ON.
SPECIFICATIONS
OM_FP-FM40A_EN.indd 17
16/07/04 13:09
