E-12
Gently remove dust from the Pre-filter, using a
vacuum cleaner attachment or
similar tool.
Pre-filter
To maintain optimum performance of this air purifier, please clean the unit including the filter
periodically.
Be sure to disconnect the power cord from the wall outlet before performing any maintenance.
CARE AND MAINTENANCE
Pre-filter
UNIT
CAUTION
Do not apply excessive pressure, when
scrubbing the pre-filter
1. Add a small amount of kitchen detergent
to water and soak for about 10 minutes.
2. Rinse off the kitchen detergent with clean
water.
3. Completely dry the filter in a well-
ventilated area.
Wipe with a dry, soft cloth
For stubborn stains or dirt, use a soft cloth
dampened with warm water.
CAUTION
•
Do not use volatile fluids
Benzine, paint thinner, polishing powder, etc. , may damage the surface.
•
Do not use detergents
Detergent ingredients may damage the unit.
SENSOR
1. Remove the Catch Panel.
2. Remove the Pre-filter.
3. Remove the Dust sensor filter.
4. If it is very dirty, wash it with water and dry it thoroughly.
Dust sensor
filter
NOTE
How to clean stubborn dirt
Pre-filter
OM_FP-FM40A_EN.indd 12
16/07/04 13:09
