Sharp FO-DC600, Руководство по обслуживанию, Страница: 17 / 150

FO-DC600U
2 – 9
3. How to make soft switch setting
To enter the soft switch mode, make the following key entries in sequence.
Press MENU 9 8 7 START A START
Press MENU key.
Press key.
Press key.
Bit1 - 8 are set.
Soft SW02 - 99 are set.
S W 01 = 1 0 0 0 0 0 0 0
S W 01 = 1 0 0 0 0 0 0 0
S W 01 = 1 0 0 0 0 0 0 0
S W 01 = 1 0 0 0 0 0 0 0
S W 02 = 0 0 0 0 0 0 0 0
S W 99 = 0 0 0 0 0 0 0 0
Press key during setting.
To finish the settings halfway between
SW01 and SW99, press the STOP key.
In this case, the setting being done to
the SW No. on display will be nullified
while settings done to the preceding
SW No. remain in effect.
The soft switch mode is terminated.
S W 01 = 0 0 0 0 0 0 0 0
START
• SW1 to SW22 : For Line-1
• SW23 to SW44 : For Line-2