7
START/MEMORY key
Press this key after dialling to begin fax transmission. Press this key before
dialling to send a fax through memory. The key can also be pressed in the
date and time display to show the percentage of memory currently used.
RESOLUTION / RECEPTION MODE key
When a document is in the feeder, press this key to adjust the resolution for
faxing or copying. At any other time, press this key to select the reception
mode (an arrow in the display will point to the currently selected reception
mode).
FUNCTION key
Press this key followed by the arrow keys to select special functions and
settings.
UP and DOWN arrow keys
Enlarge/reduce setting:
When making a copy of a document, press these
keys to select an enlarge/reduce setting.
Volume setting:
When a document is not in the feeder, press these keys to
change the speaker volume when the
key has been pressed, or the ringer
volume at any other time.
FUNCTION key settings:
Press these keys after pressing the
FUNCTION
key to scroll through the FUNCTION MODE settings.
key
Press this key to listen to the line and fax tones through the speaker when
faxing a document.
12
10
9
Monitoring phone conversations
When speaking through the handset, you can press
to allow
a third person to listen to the conversation through the speaker. (To
turn off the speaker, press the key again.)
To adjust the volume of the speaker when monitoring a conversation,
press
or
(the volume reverts to the lowest setting each
time the handset is replaced).
Note that
the speaker cannot be used for speaking
; it is only for
listening.
To avoid feedback (a loud howling sound), be sure to turn off the
speaker (press
once again) before you replace the handset.
11
13
all.book
Page 7
Thursday, March 7, 2002
9:12 AM