background image

11

www.sharp.co.uk/support

Handling Precautions

Hold the disc by the edges so the surface will not be soiled with
fingerprints. 

(

A

)

Fingerprints, dirt and scratches can cause skipping and distortion.

Do not write on the label side with a ball-point pen or other writing
utensils.

Do not use record cleaning sprays, benzine, thinner, static electricity
prevention liquids or any other solvent.

Be careful not to drop or bend the disc.

Do not install more than 1 disc on the disc tray.

Do not try to close the disc tray when the disc is not installed
properly. 

(

B

)

Be sure to store the disc in its exclusive case when not in use.
Then store upright.

Do not stick paper or adhesive labels to the disc.

If the Surface is Soiled (

C

)

Wipe gently with a soft, damp (water only) cloth.
When wiping discs, always move the cloth from the center hole
toward the outer edge.
(If you wipe the discs using a circular motion, circular scratches are
likely to occur, which will cause noise.)

If the playing surface of a disc is soiled or scratched, the Unit may
decide that the disc is incompatible and eject the disc tray, or it
may fail to play the disc correctly. Wipe any soiling off the playing
surface with a soft cloth.

If the Disc is Brought from a Cold to a Warm
Environment, Dew May Form on the Disc

Wipe the dew off with a soft, dry, lint-free cloth before using the disc.

Improper Disc Storage

You can damage discs if you store them in the following places:

Areas exposed to direct sunlight

Humid or dusty areas

Areas directly exposed to a heat outlet or heating appliance

Maintenance

Be sure to turn the Unit off and disconnect the AC power cord
before maintaining the Unit.

Wipe this Unit with a dry soft cloth.
If the surfaces are extremely dirty, wipe clean with a cloth which
has been dipped in a weak soap-and-water solution and wrung
out thoroughly and then wipe again with a dry cloth.

Never use alcohol, benzine, thinner, cleaning fluid or other
chemicals. And do not use compressed air to remove dust.

Disc Handling and Maintenance

Disc tray

Disc

A

B

C

DVNC70H009_012.pm6

20/8/02, 9:38 am

11

Содержание DV-NC70H







































































































Отзывы: