Appendix
-63
Specifi cations
Projector
XV-Z20000/DT-5000
NTSC 3.58/NTSC 4.43/PAL/PAL-M/PAL-N/PAL 60/SECAM
DTV480
I
/DTV480P/DTV720P/DTV1080
I
/DTV1080P
DLP
®
chip
Panel size: 0.95"
No. of dots: 2,073,600 dots (1,920 [H]
×
1,080 [V])
1–1.35
×
zoom lens, F2.5–8, f = 38.9–52.4 mm
220 W SHP lamp
RCA Connector: VIDEO (VIDEO), composite video, 1.0 Vp-p, sync negative, 75
Ω
termi-
nated
4-pin Mini DIN connector (S-VIDEO)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
RCA Connector (COMPONENT/RGB1, 2)
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
29-pin DVI-I terminal (DVI)
<Digital>
Input impedance 50
Ω
Input level 250-1000 mV
<Analog>
Input Impedance 75
Ω
Input level 0.7 Vp-p
<Synchronization signal>
•
Separate sync / Composite sync
Input level TTL level
Input impedance 1 K
Ω
•
Green on sync
Input level (Synchronizing input) 0.286 Vp-p
Input
Impedance 75
Ω
HDMI terminal (Video signal only)
Power jack: DC 12 V output
9-pin D-sub connector (RS-232C Terminal)
520 TV lines (NTSC 3.58 input), 750 TV lines (DTV 720P input)
12–150 MHz
43–100 Hz
15–81 kHz
AC 100–240 V
3.3 A (When using AC 100 V)
50/60 Hz
320 W (Lamp Setting “Bright”)/
265 W (Lamp Setting “Eco + Quiet”) with AC 100 V
310 W (Lamp Setting “Bright”)/
260 W (Lamp Setting “Eco + Quiet”) with AC 240 V
0.1 W (AC 100 V, RS-232C OFF) - 0.18 W (AC 240 V, RS-232C OFF)
1,200 BTU/hour
41°F to 95°F (+5°C to +35°C)
–4°F to 140°F (–20°C to +60°C)
Plastic
38 kHz
18
11
/
16
"
×
6
51
/
64
"
×
16
5
/
32
" (475 (W)
×
172.5 (H)
×
410.2 (D) mm) (main body only)
20.7 lbs. (9.4 kg)
Remote control, Power cord, Lens cap, Terminal cover, Projector operation manual
Product type
Model
Video system
Display method
DLP
®
panel
Lens
Projection lamp
Video input signal
S-video input signal
Component input signal
Analog RGB/Digital input signal
HDMI input signal
TRIGGER terminal
Computer control signal
Horizontal resolution
Pixel clock
Vertical frequency
Horizontal frequency
Rated voltage
Input current
Rated frequency
Power consumption
Power consumption (standby)
Heat dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Dimensions (approx.)
Weight (approx.)
Replacement parts
As a part of policy of continuous improvement, SHARP reserves the right to make design and specifi cation changes for
product improvement without prior notice. The performance specifi cation fi gures indicated are nominal values of produc-
tion units. There may be some deviations from these values in individual units.
