Sharp DK-CL66N, Руководство по эксплуатации

Страница: 6 / 16

04/1/28 DKCL6N_EN
6
System connections
Supplied AM loop antenna:
Connect the AM loop antenna to the AM and GND terminals.
Position the AM loop antenna for optimum reception. Place the AM
loop antenna on a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Installing the AM loop antenna:
SHARP designed the unit (DK-CL66N only). So you may fix the
security cable on the wall. Use proper screw (not supplied) to fix
screw into the wall for security cable, as shown in the illustration.
Photo and video files from iPod can be viewed by connecting the
system to TV/monitor.
If the TV/monitor has a video input, connect it to the VIDEO OUT jack
at the back of the unit and set the TV Out on the iPod unit to “ON”
position.
Notes:
●
To return to watching video on iPod screen, press and hold the
AUX/-TV OUT until the beep sound heard.
●
During iPod video playback, pressing the AUX/-TV OUT button
until the beep sound heard will not toggle video out display
between iPod and TV.
●
Please make sure to set iPod unit to either NTSC or PAL to
match your TV signal. Please visit Apple’s home page for further
information.
●
Customer should also refer iPod operation manual before
making video out setting.
Notes:
●
Unplug the AC/DC adaptor from the AC outlet if the unit will not
be used for a prolonged period of time.
●
Connecting the AC/DC adaptor to the unit disconnects the
batteries.
●
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
●
The unit does not operate with batteries. Backup batteries is to
provide continuous alarm and clock setting during power failure.
Make sure to unplug the AC/DC adaptor before making any
connections.
■
Antenna connection
< Assembling > < Attaching to the wall >
Wall Screws (not supplied)
■
Installing the security cable
(For DK-CL66N only)
(Fixed)
Wall surface
Wall mounting screw
(not supplied)
Security cable
■
Connecting iPod to TV
■
Watching videos on a TV connected to
iPod
1 Enter the iPod menu.
2 Select the desired video from the iPod unit.
3 Press the / button on the iPod unit to start playback.
■
AC/DC adaptor connection
1 Plug the AC/DC adaptor cable into the DC IN jack on the unit.
2 Plug the AC/DC adaptor into an AC outlet.
T U O O E D I V
Video cable
(not supplied)
To video input jack
TV
2
1
DC IN Jack
(DC 12V)
AC/DC Adaptor Cable
AC Outlet
(AC 100 - 240 V, 50/60 Hz)