background image

E-1

Information on Proper Disposal

Attention: 
Your 
product is 
marked with 
this symbol. 
It means 
that used 
electrical 
and 
electronic 
products 
should not 
be mixed 
with general 
household 
waste. 
There is a 
separate 
collection 
system 
for these 
products.

A.  Information  on  Disposal  for  Users  (private 

households)

1.  In the European Union
Attention: If you want to dispose of this equipment, 
please do not use the ordinary dustbin! 
Used  electrical  and  electronic  equipment  must 
be  treated  separately  and  in  accordance  with 
legislation that requires proper treatment, recovery 
and  recycling  of  used  electrical  and  electronic 
equipment.
Following  the  implementation  by  member  states, 
private households within the EU states may return 
their  used  electrical  and  electronic  equipment  to 
designated collection facilities free of charge*. 
In some countries* your local retailer may also take 
back your old product free of charge if you purchase 
a similar new one.
*)  Please  contact  your  local  authority  for  further 

details.

If  your  used  electrical  or  electronic  equipment 
has  batteries  or  accumulators,  please  dispose  of 
these  separately  beforehand  according  to  local 
requirements.
By disposing of this product correctly you will help 
ensure  that  the  waste  undergoes  the  necessary 
treatment, recovery and recycling and thus prevent 
potential  negative  effects  on  the  environment  and 
human  health  which  could  otherwise  arise  due  to 
inappropriate waste handling.
2.  In other Countries outside the EU
If  you  wish  to  discard  this  product,  please  contact 
your local authorities and ask for the correct method 
of disposal.
For  Switzerland:  Used  electrical  or  electronic 
equipment  can  be  returned  free  of  charge  to  the 
dealer,  even  if  you  don’t  purchase  a  new  product. 
Further  collection  facilities  are  listed  on  the 
homepage of www.swico.ch or www.sens.ch.
B.  Information on Disposal for Business Users
1.  In the European Union
If the product is used for business purposes and you 
want to discard it:
Please contact your SHARP dealer who will inform 
you  about  the  take-back  of  the  product. You  might 
be charged for the costs arising from take-back and 
recycling. Small products (and small amounts) might 
be taken back by your local collection facilities.
For Spain: Please contact the established collection 
system or your local authority for take-back of your 
used products.
2.  In other Countries outside the EU
If you wish to discard of this product, please contact 
your local authorities and ask for the correct method 
of disposal.

Information on Battery Disposal
The  battery  supplied  with  this  product  contains 
traces of Lead. 
For  EU: The  crossed-out  wheeled  bin  implies  that 
used  batteries  should  not  be  put  to  the  general 
household  waste!  There  is  a  separate  collection 
system for used batteries, to allow proper treatment 
and recycling in accordance with legislation. Please 
contact  your  local  authority  for  details  on  the 
collection and recycling schemes.
For Switzerland: The used battery is to be returned 
to the selling point.
For  other  non-EU  countries:  Please  contact  your 
local authority for correct method of disposal of the 
used battery.

Special notes

WARNINGS:

When the ON/STAND-BY button is set at STAND-BY 

position, mains voltage is still present inside the unit. 

When the ON/STAND-BY button is set at STAND-BY 

position,  the  unit  may  be  brought  into  operation  by 

remote control.

This  unit  contains  no  user  serviceable  parts.  Never 

remove  covers  unless  qualified  to  do  so.  This  unit 

contains  dangerous  voltages,  always  remove  mains 

plug from the socket before any service operation and 

when not in use for a long period.

To  prevent  fire  or  shock  hazard,  do  not  expose  this 

appliance  to  dripping  or  splashing.  No  objects  filled 

with  liquids,  such  as  vases,  shall  be  placed  on  the 

apparatus.

Do not turn the volume on to full at switch on and listen 

to music at moderate levels. Excessive sound pressure 

from earphones and headphones can cause hearing 

loss.

The voltage used must be the same as that specified 

on  this  unit.  Using  this  product  with  a  higher  voltage 

other  than  that  which  is  specified  is  dangerous  and 

may result in a fire or other type of accident causing 

damage. SHARP will not be held responsible for any 

damage resulting from use of this unit with a voltage 

other than that which is specified.

CAUTION:

This  product  is  classified  as  a  CLASS  1  LASER 

product.

This  product  contains  a  low  power  laser  device.  To 

ensure continued safety, do not remove any cover or 

attempt  to  gain  access  to  the  inside  of  the  product.

Refer all servicing to qualified personnel..

Note:

Audio-visual  material  may  consist  of  copyrighted  works 

which  must  not  be  recorded  without  the  authority  of  the 

owner of the copyright. Please refer to the relevant laws 

in your country.

Содержание CP-E1H

















Отзывы: