13/12/9
MPX100EA_2.fm
15
CD-MPX100E
CD or MP3/WMA disc Playback
To stop playback:
Press the button.
To remove the disc:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the DISC
SKIP button to rotate the disc tray and remove the remaining disc.
Caution:
●
Do not place two disc in one disc tray.
●
Do not play discs of special shapes (heart, octagon, etc.). It may
cause malfunctions.
●
Do not push the disc tray whilst it is moving.
●
Do not turn the disc tray by hand. This may cause malfunctions.
●
If the power fails whilst the tray is open, wait until the power is re-
stored.
●
If the disc tray is stopped forcibly, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
●
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
●
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play back.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Press the OPEN/CLOSE button to open the disc tray.
4
Place the disc on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the disc in the open position.
●
Disc can be placed on any open position on the disc tray.
●
Be sure to place 8 cm (3") disc in the middle of the disc
positions.
5
Press the OPEN/CLOSE button to close the disc tray.
●
Due to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6
To select the disc you want to listen to first, press one of
the 1 - 3 buttons on the remote control.
12 cm (5")
8 cm (3")
[CD]
Total number of
tracks on the disc
Total playing
time of the disc
Total number
of track
MP3 indicator
[MP3/WMA]
CD indicator
WMA indicator
7
Press the / button to start playback.
●
Playback will begin from track 1 on the disc you have select-
ed to play. After that disc finishes playing, the next disc will
automatically start playback.
●
When the last track on the third disc has finished playing, the
CD player will automatically stop.
●
When there is no disc in one of the disc 1 - 3 positions, that
position will be skipped and the next disc will be played.
