Sharp CD-DV999W Скачать руководство пользователя

Страница: 68 / 76

CD-DV999W

E-65

ENGLISH

Advanced Features

CD-DV999W (

)

TINSZA017AWZZ

The connection lead is not included. Purchase a commercially available lead
as shown below.

Listening to sounds of game, VCR, DVD, etc.

Connect a video game system, VCR, DVD player, etc. to
the front GAME INPUT (VIDEO, AUDIO L and R) sockets.

Connect a TV to the rear VIDEO OUT socket.

Switch the TV input to auxiliary.

Press the ON/STAND-BY button to turn the power on.

Press the GAME/VIDEO button.

Play the connected equipment.

You can enjoy sounds from the supplied speakers and images on the TV.

Note:

To prevent noise interference, place the unit away from the television.

To record sounds of game, VCR, etc.

Load a cassette in the TAPE 2 cassette compartment.

Press the GAME/VIDEO button.

Press the

button.

Press the

button.

Start the game system, VCR, etc.

Headphones

Before plugging in or unplugging the headphones, reduce the volume.

Be sure your headphones have a 3.5 mm (1/8") diameter plug and the
impedance is between 16 ohms and 50 ohms. The recommended
impedance is 32 ohms.

Plugging in the headphones disconnects the speakers automatically. Adjust
the volume using the VOLUME control.

Enhancing your system

Game system, VCR,

DVD player, etc.

Red

White

Red

White

RCA lead
(not supplied)

To the line output sockets

Auto power on function:

When you press any of the following buttons, the unit turns on.

GAME/VIDEO button (main unit and remote control): The unit turns on and
the “GAME” function is activated.

button on the remote control or main unit: The unit turns on and playback

of the last function starts (DVD/CD, TAPE, TUNER, GAME).

Video cable
(not supplied)

Yellow

*DV999W_EP61-66

04.3.4, 17:50

Содержание CD-DV999W













































































Результаты поиска

Содержание CD-DV999W

Отзывы:

Похожие инструкции для CD-DV999W

Бренды по названию

Популярные бренды

Sharp CD-DV999W, Руководство по эксплуатации

Результаты поиска

Содержание CD-DV999W

Отзывы:

Похожие инструкции для CD-DV999W

Бренды по названию

Популярные бренды