E-27
ENGLISH
T
a
pe Reco
rd
in
g
- Re
cor
d
ing fr
om the R
a
dio -
Recording from the Radio
Before recording:
z
When recording important selections, make a preliminary test to ensure that the
desired material is properly recorded.
z
SHARP is not liable for damage or loss of your recording arising from malfunction
of this unit.
z
The volume and sound controls can be adjusted with no effect on the recorded
signal (Variable Sound Monitor).
z
For recording, use only normal tapes. Do not use metal or CrO tapes.
Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback
only.
To interrupt recording:
Press the REC PAUSE
(
) button.
To resume recording, press the / (TAPE 2 ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
1
Tune in to the desired station. (See page 16.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE
(
)
button.
Recording will be paused.
4
Press the / button on the
main unit or the TAPE 2 button
on the remote control to start re-
cording.
Erase-prevention tab of cassette
tapes:
z
When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
z
To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on
the tape without the tab.
Side A
Tab for side B
Tab for side A
Listening to the Radio (See page 16.)
Содержание CD-BA250H
Страница 112: ...SHARP CORPORATION 9906 TINSZ0685AWZZ B0103 HK ...
