25
CARE AND CLEANING
Disconnect the power supply cord before cleaning or leave the door open to inactivate the oven.
Before cleaning ensure oven cavity is cool.
CLEAN THE OVEN AT REGULAR INTERVALS
- Keep the oven clean, or it could lead to deterioration of the
surface. This could adversely affect the life of the appliance and possibly result in a hazardous situation.
Exterior:
The outside may be cleaned with mild soap and warm water, wipe clean with a damp cloth. Avoid the use of
harsh abrasive cleaners.
Door:
Wipe the door and window on both sides, the door seals and adjacent parts frequently with a damp cloth to
remove any spills or spatters. Do not use abrasive cleaner.
Touch Control Panel:
Wipe the panel with a cloth dampened slightly with water only.
Do not scrub or use any sort of chemical cleaners. Avoid the use of excess water.
Interior walls:
Wipe spatters and spills with a little dish washing liquid on a soft damp cloth for hygienic reasons. For heavier
stains inside the oven cavity only, use a mild stainless steel cleaner applied with a soft damp cloth. Do not apply
to the inside of the door. Wipe clean ensuring all cleaner is removed.
After use wipe the waveguide cover in the oven with a soft damp cloth to remove any food splashes. Built-up
splashes may overheat and begin to smoke or catch fire. Do not remove the waveguide cover. You can hold
the bottom heater up by hand for cleaning only. After cleaning, sit the bottom heater down in the lowest position
(see page 4 and Figure 1).
DO NOT USE CAUSTIC CLEANERS, ABRASIVE OR HARSH CLEANSERS OR SCOURING PADS ON
YOUR OVEN. NEVER SPRAY OVEN CLEANERS DIRECTLY ONTO ANY PART OF YOUR OVEN.
DO NOT USE A STEAM CLEANER. Avoid using excess
water. After cleaning the oven, ensure any water is remove
with a soft cloth.
Note:
At regular intervals, heat the oven referring to "Heating
without Food" on page 9. Because, the splashed dirt or
food oil remained around the top and bottom heaters and
oven walls may cause the smoke and odour.
Turntable/Turntable Support/Racks:
Wash with mild soapy water and dry thoroughly.
Bottom heater
Figure 1