16
SEE
LABEL
SELECT
FOOD
COFFEE
OR TEA
PRESSING
1
FOR
CUPS
CONTINUE
TO MAKE
2 CUPS
PRESS
START
1
Select desired
Beverage
Center
setting by touch-
ing desired number pad.
(Ex: Touch number
pad to make coffee.)
F O O D
A M O U N T
COMPU DEFROST
(continued)
P R O C E D U R E
L E T ’ S C O O K
Start defrosting with fat side down. After each stage, turn roast over
and shield the warm portions with aluminum foil.
Let stand, covered, for 30 to 60 minutes.
7. Roast
2.0 - 4.0 lb
After audible signal, stir if possible. At end, stir well and let stand,
covered, for 5 to 10 minutes.
8. Casserole/Soup
1 - 6 cups
NOTE for SUPER DEFROST:
SUPER DEFROST provides just enough defrosting that the foods can be
used in recipes or for cooking. There will be some ice crystals remaining.
NOTE for COMPU DEFROST:
Check foods when oven signals. After final stage, small sections may still
be icy. Let stand to continue thawing. Do not defrost until all ice crystals
are thawed.
Shielding prevents cooking from occurring before the center of the food
is defrosted. Use small smooth strips of aluminum foil to cover edges and
thinner sections of the food.
Beverage Center enables you to reheat coffee or tea to
restore to a more suitable drinking temperature or to
make instant coffee or tea.
•
Suppose you want to make 2 cups of coffee.
BEVERAGE CENTER
P R O C E D U R E
D I S P L A Y
1
Touch
Beverage
Center
pad.
2
BEVERAGE CENTER CHART
F O O D
A M O U N T
P R O C E D U R E
Use this setting for heating COLD TAP WATER to a temperature
somewhat below the boiling point to make instant coffee or tea.
Touch number
pad for 1 cup increase per touch. Stir liquid briskly
before and after heating to avoid “eruption”.
1. Make coffee/tea
1 - 4
cups
This setting is good for restoring cooled beverage to a better drink-
ing temperature. Touch number
pad for a 0.5 cup increase per
touch. Stir after heating.
2. Reheat
.5 - 2.0 cups
Enter quantity by touching same number pad
repeatedly. (Ex: Touch two more times for 2
cups.)
x 2
NUMBER
Beverage
Center
1
1
1
NOTE:
1. Beverage Center can be programmed with More
or Less Time Adjustment. Touch the
Power Level
pad once or twice before touching
Start
pad. See
page 23.
2. Touch
Custom Help
pad when the HELP indicator
is lighted in the display for a helpful hint.
3. More or less than the quantity listed in the chart
should be made following the guidelines in any
microwave book.
3
Touch
Start
pad.
1
2
Start
Touch On