PRINTER TROUBLESHOOTING
42
2.
If face up output is specified:
A. If printing one copy of a lengthy document is
specified:
Printed sheets will be divided into blocks* as
shown in the illustration. A separator sheet
will be inserted between each block. Finally,
a notice page will be output.
B. If printing multiple copies of a lengthy
document is specified and the key operator
program “Output Method When Memory Is
Full” (page 37) is set to “1 SET”:
The printer will print only one set in blocks*
as in 2-A and output a notice page at the end
of the job.
C. If printing multiple copies of a lengthy
document is specified and the key operator
program “Output Method When Memory Is
Full” (page 37) is set to “MULTI-SET”:
Printed sheets will be divided into blocks* as
shown in the illustration. A separator sheet
will be inserted between each block. Finally,
a notice page will be output. The number of
pages in a block can be changed using the
key operator program “Memory Reserved for
Printer”. See page 37.
*
The number of pages in a block varies
with the paper size, setting of the key
operator program “Memory Reserved for
Printer” and printer models.
For the models without hard disk drive and the models with
a 2 GB hard disk drive, the key operator program “Memory
Reserved for Printer” is not available. In case of those
without hard disk drive, the number of pages in a block is
variable according to the memory use and those with a 2
GB drive allow 320 pages in a block.
60
1
Page 61
Page 120
Separator
sheet
Page 60
1 block
Page 1
61
Notice page
120
Page 61
Page 120
Separator
sheet
Page 60
1 block
Page 1
Notice page
Separator
sheet
1 block
Separator
sheet
Separator
sheet
Page 60
Page 1
Page 61
Page 120
Page 120
Page 61
Notice page
Page 1
Page 60
NOTE
Example:
Two sets of 120-page document are
printed in 60-page blocks.
