manualshive.com logo in svg

Sharp AR-PB2, Руководство по эксплуатации

Поделиться
Скачать
Sharp AR-PB2 Скачать руководство пользователя страница 44

USING THE OPERATION PANEL

38

Example: One set of 120-page document is

printed in 60-page blocks.

Example: Two sets of 120-page document are

printed in 60-page blocks.

Enable Bypass-Tray Size Detection

This program is used to enable or disable paper size detection of the bypass tray in the printer
mode. This setting does not affect the paper size detection in the copier mode.

To enable paper size detection of the bypass tray in the printer mode, press the “ENABLE
BYPASS-TRAY SIZE DETECTION” box to display a check mark.

To disable paper size detection, press the checked box again to clear the check mark.

If size detection of the bypass tray is disabled, paper in the bypass tray will always be treated as the largest allowable
size paper (either 11" x 17" or A3). If an image larger than the paper in the bypass tray is printed, a malfunction may
occur. Be careful when disabling the size detection.

Prohibit Notice Page Printing

This program is used to specify whether a notice page and separator sheets will be printed when
the printer memory becomes full and divided printing must be performed. If notice page printing has
been enabled, a notice page will be printed at the end of a print job and separator sheets will be
printed between each block letting the user know that the job has been divided into blocks and the
user must re-stack the document.

To prohibit notice page printing, press the “PROHIBIT NOTICE PAGE PRINTING” box to display a
check mark.

To restore notice page printing, press the checked box again to clear the check mark.

Page 61

Page 120

Separator

sheet

Page 60

1 block

Page 1

Notice page

Separator 

sheet

1 block

Separator 

sheet

Separator 

sheet

Page 60

Page 1

Page 61

Page 120

Page 120

Page 61

Notice page

Page 1

Page 60

NOTE

Содержание AR-PB2





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды