Sharp AR-M280N Imager, Руководство по обслуживанию

Страница: 8 / 40

AR-M280U SPECIFICATIONS 4-3
f. Others
* 1 For models without a hard disk drive, an optional hard disk drive
(AR-HD3) must be installed .
* 2 Functions when peripheral devices are installed.
* 3 Not supported in the Windows NT 4.0 environment.
* 4 2/4/6/9/16 is supported in the Windows 2000 environment.
* 5 Only one size is supported in the Windows 2000 environment.
* 6 Only 35 fonts are supported in the Windows NT 4.0 environment.
* 7 This function is limited for PPD.
* 8 PCL6 only
(5) Compatibility
B. Expanded RAM
Installation of additional RAM will provide the following:
1) Time out error reduction
2) Spool time reduction
3) Avoidance of Virtual Memory (VM) error / memory full
Use commercially available RAM with the following specifications.
Note: If RAM used does not meet the follow specifications, the copier
may not recognize the additional RAM or its capacity correctly.
<Specification>
<Operation-assured Memory> (As of March / 2001)
C. Scanner function
*Scanner function, the NIC card and Network Scanner kit are required.
(1) Scanner function
(2) Support System
(3) Support Image
(4) Transmission Mode
(5) Image Process
(6) Original Memory
(7) Specified Destination
(8) Specified Multiple Destinations
O : Available
When an optional PS3 expansion
kit is installed
Function PCL5e/
PCL6 PS PPD
(Windows) PPD
(Macintosh)
Watermark*7 Yes Yes Yes Yes
Overlay Yes Yes N/A N/A
Job retention*1 Yes Yes N/A Yes
Account control Yes Yes N/A Yes
Custom settings Yes Yes N/A N/A
Automatic
configuration*2 Yes Yes N/A Yes
Job end notification Yes Yes N/A N/A
PCL 5e
compatibility Target for PCL5e is to be compatible with HP LaserJet 4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
PCL6
compatibility Target for PCL6 is to be compatible with HP LaserJet 4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
All the PJL commands are not necessarily included in
the compatibility.
PostScript
Compatibility Roman PostScript is targeted to be compatible with
Adobe PostScript as performed in HP LaserJet 4000.
Small margin difference, rendering difference by
different font family, default and transfer function
difference are not to be included in the compatibility.
DIMM TYPE 168pin 3.3V Unbuffered SDRAM DIMM Non-ECC
DIMM capacity 64MByte, 128MByte, 256MByte
CAS LATENCY CL=2
SDRAM CLOCK For PC100, PC133
SPD Supporting
Parity Not support
ECC Not support
Manufacture Capacity Model name RAM CHIP name Note
Kingston
Technology 128MB KVR133X64C3/128 HYB39S64800BT-7.5
128MB KVR133X64C3-128 D456821G-A75-9JF
256MB KVR133X64C3-256 HY57V28820AT-H
Viking
Components 64MB VIK8641CL2 µPD456841G5
-A80-9JF
64MB VIK8641CL2 D456841G5-A80-9JF
128MB VIK6642CL2 TC59SM708FT-80
128MB VIK6642CL2 D4564841G5-A80
-9JF
256MB VIK2642CL2 TC59SM708FT-80
Memory Card
Technology 64MB DM864VS65804X-
7G GM72V66841XT75
128MB DM1665VS65804X-
7G HY57V64820HG
Scanner mode Scan to E-mail (Internet FAX)
Scan to Server (Client PC)
Embedded server SMTP server
FTP server
Protocol TCP/IP
Format TIFF, PDF, TIFF-F
* Selectable for each page
Compression method Uncompressed, G3(1-dimension) *1, G4 *2
*1 G3 (1-dimension) = MH (Modified Huffman)
*2 G4 = MMR (Modified MR)
DSPF/OC
transmission switching Available
(Switching during the reading is not possible)
Half tone reproduction Equivalent to 256 levels
Exposure adjustment
Light / Auto / Dark
Quality selection Half-tone ON/OFF
Resolution* Normal ( 200x200dpi )
Fine ( 300x300dpi )
Super fine ( 400x400dpi )
Ultra fine ( 600x600dpi )
Varies with the file type/transmission method
Standard Commonly use ERDH area of memory.
Memory expansion Special : As per ERDH memory
Specified destination Specifying by one-touch or group
One-touch* Max. 500 destinations
(in conjunction with the one-touch dial of FAX)
Max. 100 destinations can be registered
for FTP and Desktop.
Group* To be registered in one-touch
Program Available
Specified destination Specifying by one-touch or group
No. of registration
Max. 300 items
(in conjunction with those of FAX)
Sequential
broadcasting Available
(E-mail only. It is not available for FTP/Desktop.)
Simultaneous FAX
transmission Available
(Specifying multiple destinations of FAX, E-mail or FTP
and broadcasting by a single scan)
' !"#$%