Sharp AR-M280N Imager, Руководство по обслуживанию

Страница: 23 / 40

AR-M280U SIMULATIONS 9-4
<List of set values>
<List of set values>
Default setup for supporting 100K drums
1) When the value is changed from 127 to 255 by SIM 44-1, the
following default values of the laser power setup must be adjusted.
* When the EEPROM is replaced (memory is cleared) in a 28-sheet
machine, setup of the 100K drum must be performed with SIM 44-1
(setup value: 255).
The above setup values are adjusted according to the setup of SIM
44-1. (Though the destination setup is changed (SIM 26-6), the
above setup will not be changed automatically.)
61-3
Purpose Adjustment
Function (Content) Used to adjust the scanner (exposure) laser
power (absolute value) in the FAX reception
mode. (Only when FAX is installed.)
Section PCU
Item Operation
Operation/Procedure Set the laser power in FAX reception.
Enter the set value and press Start to store it.
Initial value Set range
1 FAX reception 45PPM 100 100 - 150
(45PPM)
76 - 150
(28/35PPM)
35/28PPM 76
61-4
Purpose Adjustment
Function (Content) Used to adjust the laser power (absolute value)
in the printer mode.
Section PCU
Item
Operation/Procedure Set the laser power value in the printer mode.
Enter the value and press START to store it.
Initial value Set range
1 PRINTER 45PPM 100 100 - 150
(45PPM)
76 - 150
(28/35PPM)
28/35PPM 76
SIMULATION 61-3
LASER POWER SETTING (FAX). PRESS START.
1. FAX
1
5
SIMULATION 61-3
LASER POWER SETTING (FAX). INPUT VALUE 1-165, AND PRESS START.
1. FAX
5
Press [START] key. Press [CUSTOM SETTING] key
or [START] key.
SIMULATION 61-4
LASER POWER SETTING (PRINTER). PRESS START.
1. PRINTER
1
5
SIMULATION 61-4
LASER POWER SETTING (PRINTER). INPUT VALUE 1-165, AND PRESS
START.
1. PRINTER
5
Press [START] key. Press [CUSTOM SETTING] key
or [START] key.
Drum 50K 100K(80K)
Sim44-1 127 255
Model 35PPM 45PPM 35PPM 45PPM 28PPM
Laser power
setup
SIM 61-2 80 104 76 100 76
Maintenance cycle
SIM 21-1 0(50K) 7(100K) 5(80K)
) !"#$%&