Sharp AR-C160 Скачать руководство пользователя

Страница: 58 / 148

3-14

CHAPTER

SPECIAL FUNCTIONS

Covers

COVERS

The COVERS mode is used to place covers on the front, back, or both
the front and back of multipage documents.

●

To use the COVERS mode, an optional RADF must be installed.

●

Front cover sheets can be copied on, but only on the front side even
in the 1-sided to 2-sided and 2-sided to 2-sided copy modes.
The back side of the original designated as the cover will not be
copied.

●

Back cover sheets cannot be copied on, either on the front side or on
the back side.

●

Cover sheets must be fed from the bypass tray and must be the same
size as the copy paper being used to copy the document.

●

When the COVERS mode is selected, the stream feeding mode of
the RADF will always be off.

Place the originals in the optional document feeder tray.

Press the 2-SIDED COPY key and select the desired
duplex mode if needed. Press the “OK” key to close the
duplex selection window.

●

To copy in the 1-sided to 2-sided or 2-sided to 2-sided copy
mode, an optional duplex module (AR-DU2N) must be installed.

Press the SPECIAL MODES key.

●

The SPECIAL MODES screen will appear.

Press the “COVERS” key on the touch panel.

●

The setting screen for COVERS will appear.

Covers

OUTPUT

2-SIDED

COPY

AUTO

2-SIDED

COPY

SPECIAL

MODES

READY TO

READY TO COPY.

SPECIAL MODES

MARGIN SHIFT

ERASE

IMAGE EDIT

COVERS

CENTERING

DUAL PAGE

COPY

COLOR

ADJUSTMENTS

TRANSPARENCY INSERTS

AUTO

EXPOSURE

PAPER SELECT

100%

COPY RATIO

8/ 11

AUTO

LOAD COVER STOCK INTO BYPASS-TRAY.

COVERS

FRONT

BACK

FRONT+BACK

YES

PRINT ON FRONT COVER?

CANCEL

Содержание AR-C160





















































































































































Результаты поиска

Содержание AR-C160

Отзывы:

Похожие инструкции для AR-C160

Бренды по названию

Популярные бренды

Sharp AR-C160, Руководство по эксплуатации

Результаты поиска

Содержание AR-C160

Отзывы:

Похожие инструкции для AR-C160

Бренды по названию

Популярные бренды